Revue de Métallurgie

Free Access

Résumé des articles techniques p. III

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal/20020301

• Abstract
• PDF (27.58 KB)

Relining in 2001 of BF 4 of Dunkirk p. 205

D. Lao, J. L. Boutemont, A. Brouchart, M. Retif, G. Demol and P. Chantry

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2002202

• Abstract
• PDF (645.4 KB)

Relining of the Sidmar blast furnace B in 2001 p. 215

L. Bonte, R. Dhondt, R. De Pauw, S. Van Campe and H. De Langhe

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2002115

• Abstract
• PDF (703.7 KB)

Measurement of the material trajectories in bell-less top charging p. 223

D. Steyls, J. P. Fischbach, J. F. Noville, P. Dufresne, S. Clairay and G. Lesoin

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2002112

• Abstract
• PDF (351.0 KB)

Development of burden distribution control with an advanced bell-less top at Chiba No.6 blast furnace p. 231

T. Sato, T. Nouchi, K. Takeda, T. Kawai, H. Kamano and N. Takashima

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2002114

• Abstract
• PDF (350.4 KB)

Improvement of productivity by stand-support sintering in commercial sintering machines p. 241

K. Higuchi, T. Kawaguchi, M. Kobayashi, Y. Hosotani, K. Nakamura, K. Iwamoto and M. Fujitomo

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2002116

• Abstract
• PDF (166.9 KB)

Perfect sinter, the dream of the blast furnace operator p. 249

G. Cip, L. Gould, O. Pammer, M. Stiasny, J. Wurm and G. Pillmair

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2002117

• Abstract
• PDF (259.6 KB)

Reduction of dioxin emissions by adding inhibitors in the sinter feed p. 257

A. Arion, P. Florimond, E. Marlière, F. Berho, Ph. Le Louër, P. Neau and R. Depasse

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2002113

• Abstract
• PDF (613.3 KB)

Novel surface quality control for hot slabs in continuous casting p. 267

F. Obeso, L. F. Sancho, I. Alvarez, A. Díez, G. Sirat and R. Falessi

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2002102

• Abstract
• PDF (608.4 KB)

EISYS-improved edge inspection of cold rolled products p. 277

J. Reisinger, T. Miric, A. Kogler and W. Schickmaier

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2002118

• Abstract
• PDF (139.2 KB)

Tracing of surface treatment reactors p. 283

R. Nicolle, F. Kop, J. Muller and Z. Zermout

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2002119

• Abstract
• PDF (387.9 KB)

Microstructure and properties of not-fully recrystallized IF steels p. 291

O. Bouaziz, H. Petitgand, C. Le Corre and G. Salvador

Published online: 25 October 2002

DOI: https://doi.org/10.1051/metal:2002120

• Abstract
• PDF (340.1 KB)