Issue |
Rev. Metall.
Volume 109, Number 6, 2012
Light Alloys for Transport
|
|
---|---|---|
Page(s) | 443 - 452 | |
DOI | https://doi.org/10.1051/metal/2012039 | |
Published online | 19 October 2012 |
Relationship between coke properties and solution loss behavior and its influence on post-reaction strength of coke
Key Laboratory of Chemical Metallurgy Engineering, Liaoning
Province, University of Science and Technology, Anshan, Liaoning, 114501, China
e-mail: wangqi8822@sina.com
Received: 21 March 2012
Accepted: 6 September 2012
Three typical cokes were used for experiments in order to clarify the relationship between coke properties and solution loss behavior and its influence on the post-reaction strength of coke. Isothermal reactions between coke and CO2 at 1050–1300 °C were stopped at a weight loss of 25%. The post-reaction strength of coke was tested by an I-Type tumbler. Coke chemical reactivity and pore structure were tested to analyze the coke properties. The results show that the reaction temperature caused the most serious degradation to three cokes that were different due to their different properties. If two kinds of coke have similar chemical reactivity, the one with the less developed pore structure has a lower temperature, causing the most serious degradation. If two kinds of coke have similar pore structure, the one with the higher chemical reactivity has a lower temperature, causing the most serious degradation. This knowledge contributes to a reference for evaluating the capability of coke strength for resisting solution loss.
Key words: Coke / post-reaction strength / CRI / CSR / temperature
© EDP Sciences 2012
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.