Metallurgical Research & Technology

Acidithiobacillus ferrooxidans: performances on the low-grade polymetallic oxidized-manganese and sulfur-nickel ores redox system 601

Kang Jin-xing, Feng Ya-li, Li Hao-ran, Du Zhu-wei, Deng Xiang-yi and Wang Hong-jun

Published online: 07 December 2018

DOI: https://doi.org/10.1051/metal/2018019

Effects of chromium content on the nitrided layer of binary Fe-Cr alloys 602

Nacer-Eddine Benrabia, Mohamed-el-Amine Djeghlal and Laurent Barrallier

Published online: 07 December 2018

DOI: https://doi.org/10.1051/metal/2018042

Effect of subsurface negative segregation induced by M-EMS on componential homogeneity for bloom continuous casting 603

Haibo Sun, Liejun Li, Xuexing Wu and Chengbin Liu

Published online: 07 December 2018

DOI: https://doi.org/10.1051/metal/2018031

Research status and prospects of the iron ore’s high temperature behaviors in the sintering process 604

Xiao-zhe Wang, Dong-hui Liu, Jian-liang Zhang and Zheng-Jian Liu

Published online: 07 December 2018

DOI: https://doi.org/10.1051/metal/2018036

Study of manganese sulfide precipitation in medium sulfur, non-quenched and tempered steel via experiments and thermodynamic calculation 605

Hui Liu, Delin Hu, Yanxin Wu, Zongze Huang, Jinmin An and Jianxun Fu

Published online: 07 December 2018

DOI: https://doi.org/10.1051/metal/2018035

Influence of Al₄C₃ nanophase on structural stability and mechanical properties of Al-Al₄C₃ composites after thermal exposure 606

Oksana Velgosová, Michal Besterci and Beata Balloková

Published online: 07 December 2018

DOI: https://doi.org/10.1051/metal/2018022

Sequential extraction of vanadium and chromium from chromium-bearing vanadium slag through two-stage soda roasting-water leaching 607

Helin Fan, Huamei Duan, Wenjie He, Dengfu Chen, Tao Liu, Mujun Long and Pei Xu

Published online: 11 December 2018

DOI: https://doi.org/10.1051/metal/2018093

An infrared spectroscopic study of non-metallic portion of Linz-Donawitz slag fines generated at Tata Steel, Jamshedpur 608

Shrenivas Ashrit, Ravikrishna V. Chatti, S. Sarkar, Rayasam Venugopal and Udayabhanu G. Nair

Published online: 11 December 2018

DOI: https://doi.org/10.1051/metal/2018024

The influences of silver and zinc addition on the electrochemical performances of the Pb–Ca–Sn Grids for lead acid batteries 609

Lei Xu, Mi Yan, Xinying Wang, Wei Li and Jinhui Peng

Published online: 11 December 2018

DOI: https://doi.org/10.1051/metal/2018002

Dissimilar resistance spot welding of AISI 304 to AISI 409 stainless steels: mechanical properties and microstructural evolutions 610

Mehdi Safari, Hossein Mostaan and Abdoreza Ghaderi

Published online: 11 December 2018

DOI: https://doi.org/10.1051/metal/2018057

Kinetics of limestone decomposition in hot metal 611

Biao Tang, Qifu Xiang, Jing Wang, Yunlong Zhang, Xingyi Li, Hanchi Cheng, Ming Hu and Zongshu Zou

Published online: 14 December 2018

DOI: https://doi.org/10.1051/metal/2018055

Extraction and separation of La(III), Pr(III) and Nd(III) using binary mixture of D2EHPA with Cyanex272, TOPO, and TBP extractants 612

Akram Tofighi Naeem, Eslam Kashi, Mohammad Ali Salehi and Razieh Habibpour

Published online: 14 December 2018

DOI: https://doi.org/10.1051/metal/2018043

High-efficient combustion of gas-fired furnace with 21∼36% oxygen-enriched air 613

Liying Qi, JunXiang Guo, Qing Wang, Wenbin Dai, Hao Bai and Daqiang Cang

Published online: 14 December 2018

DOI: https://doi.org/10.1051/metal/2018098

Thermodynamic evaluation using the law of mass action under consideration of the activity coefficients in the system NdCl₃-HCl (or NaOH)-H₂O-DEHPA-kerosene 614

Christiane Scharf and André Ditze

Published online: 14 December 2018

DOI: https://doi.org/10.1051/metal/2018063

Metallurgical Research & Technology

Volume 115 / No 6 (2018)

Acidithiobacillus ferrooxidans: performances on the low-grade polymetallic oxidized-manganese and sulfur-nickel ores redox system 601

Effects of chromium content on the nitrided layer of binary Fe-Cr alloys 602

Effect of subsurface negative segregation induced by M-EMS on componential homogeneity for bloom continuous casting 603

Research status and prospects of the iron ore’s high temperature behaviors in the sintering process 604

Study of manganese sulfide precipitation in medium sulfur, non-quenched and tempered steel via experiments and thermodynamic calculation 605

Influence of Al4C3 nanophase on structural stability and mechanical properties of Al-Al4C3 composites after thermal exposure 606

Sequential extraction of vanadium and chromium from chromium-bearing vanadium slag through two-stage soda roasting-water leaching 607

An infrared spectroscopic study of non-metallic portion of Linz-Donawitz slag fines generated at Tata Steel, Jamshedpur 608

The influences of silver and zinc addition on the electrochemical performances of the Pb–Ca–Sn Grids for lead acid batteries 609

Dissimilar resistance spot welding of AISI 304 to AISI 409 stainless steels: mechanical properties and microstructural evolutions 610

Kinetics of limestone decomposition in hot metal 611

Extraction and separation of La(III), Pr(III) and Nd(III) using binary mixture of D2EHPA with Cyanex272, TOPO, and TBP extractants 612

High-efficient combustion of gas-fired furnace with 21∼36% oxygen-enriched air 613

Thermodynamic evaluation using the law of mass action under consideration of the activity coefficients in the system NdCl3-HCl (or NaOH)-H2O-DEHPA-kerosene 614

Influence of Al₄C₃ nanophase on structural stability and mechanical properties of Al-Al₄C₃ composites after thermal exposure 606

Thermodynamic evaluation using the law of mass action under consideration of the activity coefficients in the system NdCl₃-HCl (or NaOH)-H₂O-DEHPA-kerosene 614