Metallurgical Research & Technology

Effect of Mg addition on carbides in H13 steel during electroslag remelting process 501

Bao He, Jing Li, Cheng-bin Shi and Hao Wang

Published online: 23 October 2018

DOI: https://doi.org/10.1051/metal/2018071

• Full HTML
• PDF (2.321 MB)
• References

Study on desulfurization capacity of high alumina blast furnace slag at 1773 K using slag-metal equilibrium technique 502

Trinath Talapaneni, Natraj Yedla and Smarajit Sarkar

Published online: 23 October 2018

DOI: https://doi.org/10.1051/metal/2018018

• Full HTML
• PDF (1.108 MB)
• References

Thermodynamic assessment of Hafnium Iridium binary system 503

Mohamed Idbenali, Colette Servant and M’barek Feddaoui

Published online: 23 October 2018

DOI: https://doi.org/10.1051/metal/2018001

• Full HTML
• PDF (763.5 KB)
• References

Resource utilization of titanium-containing slurry by selective extraction and leaching 504

Xiaoyan Xiang, Wentang Xia and Jianguo Yin

Published online: 23 October 2018

DOI: https://doi.org/10.1051/metal/2018011

• Full HTML
• PDF (603.3 KB)
• References

Factors influencing melt fluidity of iron ore 505

Shengli Wu and Xiaobo Zhai

Published online: 23 October 2018

DOI: https://doi.org/10.1051/metal/2018023

• Full HTML
• PDF (4.529 MB)
• References

Free Access

Macrosegregation behavior of solute Cu in the solidifying Al-Cu alloys in super-gravity field 506

Yuhou Yang, Bo Song, Zhanbing Yang, Jin Cheng, Gaoyang Song and Longfei Li

Published online: 23 October 2018

DOI: https://doi.org/10.1051/metal/2018025

• Full HTML
• PDF (14.67 MB)
• References

Strain rate sensitivity and strain hardening response of DP1000 dual phase steel 507

Onur Çavusoglu, Hakan Gürün, Serkan Toros and Ahmet Güral

Published online: 23 October 2018

DOI: https://doi.org/10.1051/metal/2018016

• Full HTML
• PDF (4.361 MB)
• References

Microwave-Assisted Grinding of Bolkardag (Nigde, Turkey) Gold Ore and Enhanced Cyanide Leachability 508

Cemaliye Seflek and Oktay Bayat

Published online: 23 October 2018

DOI: https://doi.org/10.1051/metal/2018039

• Full HTML
• PDF (1.499 MB)
• References

Fabrication and characterization of hypoeutectic open-cell Al-Si foams using gravity die casting and squeeze casting 509

Samsudin Fitri Aida, Mirsad Nur Hijrah, Amirah Ahmad Hamdi, Hussain Zuhailawati and Abu Seman Anasyida

Published online: 09 November 2018

DOI: https://doi.org/10.1051/metal/2018085

• Full HTML
• PDF (9.552 MB)
• References

Recovery of germanium from acid leach solutions of zinc refinery residue using an oxime extractant of HBL101 510

Baohai Cheng, Ting’an Zhang, Kuifang Zhang, Zuoying Cao and Li Zeng

Published online: 09 November 2018

DOI: https://doi.org/10.1051/metal/2018037

• Full HTML
• PDF (847.1 KB)
• References

Simulation and experimental research on top blown burner lance used for chrome ore smelting reduction process 511

Shaoyan Hu, Rong Zhu, Kai Dong, Runzao Liu and Nan Jiang

Published online: 09 November 2018

DOI: https://doi.org/10.1051/metal/2018038

• Full HTML
• PDF (2.894 MB)
• References

Reaction between MgO-SiO₂ refractory material and Fe-Al alloy 512

Abdulaziz Alhussein, Piotr R. Scheller and Wen Yang

Published online: 09 November 2018

DOI: https://doi.org/10.1051/metal/2018079

• Full HTML
• PDF (4.928 MB)
• References