Metallurgical Research & Technology

Volume 115 / No 4 (2018)

Export the citation of the selected articles Export
Select all

Trends in heat treatment and surface engineering

Free Access

Editorial

Trends in heat treatment and surface engineering 401

Fabienne Delaunois, Francine Roudet and Véronique Vitry

Published online: 22 August 2018

DOI: https://doi.org/10.1051/metal/2018060

Formation and stabilization of reverted austenite in supermartensitic stainless steel 402

Frank Niessen, Flemming Bjerg Grumsen, John Hald and Marcel Adrianius Johannes Somers

Published online: 22 August 2018

DOI: https://doi.org/10.1051/metal/2018051

Short time austenitizing effects on the hardenability of 0.55 wt. pct. Carbon steels 403

Robert Cryderman and Trevor Ballard

Published online: 22 August 2018

DOI: https://doi.org/10.1051/metal/2018029

Investigation of the precipitation kinetics and microstructure evolution of martensitic AISI 4140 steel during tempering with high heating rates 404

Daniel Kaiser, Bernhard de Graaff, Stefan Dietrich and Volker Schulze

Published online: 22 August 2018

DOI: https://doi.org/10.1051/metal/2018026

Characterization of mechanical properties of metallic foams by instrumented indentation test 405

Ali Nayebi and Azam Surmiri

Published online: 22 August 2018

DOI: https://doi.org/10.1051/metal/2018028

Open Access

Hypothetic impact of chemical bonding on the moisture resistance of amorphous Si_xN_yH_z by plasma-enhanced chemical vapor deposition 406

Catheline Cazako, Karim Inal, Alain Burr, Frederic Georgi and Rodolphe Cauro

Published online: 24 August 2018

DOI: https://doi.org/10.1051/metal/2018072

Comparing fast inductive tempering and conventional tempering: Effects on microstructure and mechanical properties 407

Annika Eggbauer Vieweg, Gerald Ressel, Peter Raninger, Petri Prevedel, Stefan Marsoner and Reinhold Ebner

Published online: 18 September 2018

DOI: https://doi.org/10.1051/metal/2018015

Combined X-ray diffraction and photothermal radiometry methods for in situ analysis of nitriding treatment 408

Juan Dong, Jeremy Epp, Robin Lipinski, Michael Sorg, Hans-Werner Zoch and Andreas Fischer

Published online: 18 September 2018

DOI: https://doi.org/10.1051/metal/2018045

Mathematical model for prediction of hydrogen pick-up of liquid steel during filling of a continuous casting tundish 409

Bernardo M. Braga and Roberto P. Tavares

Published online: 22 August 2018

DOI: https://doi.org/10.1051/metal/2018009

Effects of oxygen content on microstructure and impact toughness of high heat input flux-cored wire weld metals 410

Fengyu Song, Yanmei Li, Ping Wang and Fuxian Zhu

Published online: 22 August 2018

DOI: https://doi.org/10.1051/metal/2018012

Thermal and kinetic analysis on the co-combustion behaviors of anthracite and PVC 411

Minmin Sun, Jianliang Zhang, Kejiang Li, Guangwei Wang, Haiyang Wang and Qi Wang

Published online: 22 August 2018

DOI: https://doi.org/10.1051/metal/2018064

Influence of TiC_0.3N_0.7 on viscosity of TiO₂-containing slag 412

Renze Xu, Jianliang Zhang, Kexin Jiao and Yanxiang Liu

Published online: 22 August 2018

DOI: https://doi.org/10.1051/metal/2018008

Experimental study of the effects of wire EDM on the characteristics of ferritic steel, at a micro-scale on the contour cut surface 413

Nida Naveed

Published online: 22 August 2018

DOI: https://doi.org/10.1051/metal/2018032

Stabilization of free CaO in molten BOF slag by addition of silica at high temperature 414

Xiao Yin, Chongmin Zhang, Guocheng Wang, Yonghong Cai and Changming Zhao

Published online: 11 October 2018

DOI: https://doi.org/10.1051/metal/2018021

Free Access

Kinetic study on compositional variations of inclusions, steel and slag during refining process 415

Ying Zhang, Ying Ren and Lifeng Zhang

Published online: 11 October 2018

DOI: https://doi.org/10.1051/metal/2018059

Preparation of industrial grade MoO₂ by the reaction between industrial grade MoO₃ and activated carbon 416

Guo-Hua Zhang, Da-Hang Wang, Lu Wang, Kuo-Chih Chou and Anping Dong

Published online: 12 October 2018

DOI: https://doi.org/10.1051/metal/2017104

Study of thermogravimetric curves of LD Slag size fractions in oxygen and nitrogen atmosphere and effect of FeO and free lime on weight loss at different temperatures 417

Shrenivas Ashrit, Ravikrishna V. Chatti, Udayabhanu G. Nair and Venugopal Rayasam

Published online: 11 October 2018

DOI: https://doi.org/10.1051/metal/2018017

Evolutional behavior of carbonaceous material during dissolution in molten iron of COREX 418

Runsheng Xu, Jianliang Zhang, Wei Wang, Bowen Dai, Haibin Zuo, Zhengliang Xue and Mingming Song

Published online: 12 October 2018

DOI: https://doi.org/10.1051/metal/2018020

Improvement of hot ductility of C-Mn Steel containing arsenic by rare earth Ce 419

Wenbin Xin, Jing Zhang, Guoping Luo, Ruifen Wang, Qingyong Meng and Bo Song

Published online: 15 October 2018

DOI: https://doi.org/10.1051/metal/2018030

Free Access

Product innovations of key economic importance for the steel industry 420

Jean-Pierre Birat

Published online: 15 October 2018

DOI: https://doi.org/10.1051/metal/2018010

Coal blend properties and evaluation on the quality of stamp charging coke from weakly coking blends 421

Xue-yan Liu, Xing Han, Huan Cheng, Xi-Tao Yin, Rui Guo, Xue-fei Zhao and Qi Wang

Published online: 16 October 2018

DOI: https://doi.org/10.1051/metal/2017043

Metallurgical Research & Technology

Volume 115 / No 4 (2018)

Trends in heat treatment and surface engineering

Trends in heat treatment and surface engineering 401

Formation and stabilization of reverted austenite in supermartensitic stainless steel 402

Short time austenitizing effects on the hardenability of 0.55 wt. pct. Carbon steels 403

Investigation of the precipitation kinetics and microstructure evolution of martensitic AISI 4140 steel during tempering with high heating rates 404

Characterization of mechanical properties of metallic foams by instrumented indentation test 405

Hypothetic impact of chemical bonding on the moisture resistance of amorphous SixNyHz by plasma-enhanced chemical vapor deposition 406

Comparing fast inductive tempering and conventional tempering: Effects on microstructure and mechanical properties 407

Combined X-ray diffraction and photothermal radiometry methods for in situ analysis of nitriding treatment 408

Mathematical model for prediction of hydrogen pick-up of liquid steel during filling of a continuous casting tundish 409

Effects of oxygen content on microstructure and impact toughness of high heat input flux-cored wire weld metals 410

Thermal and kinetic analysis on the co-combustion behaviors of anthracite and PVC 411

Influence of TiC0.3N0.7 on viscosity of TiO2-containing slag 412

Experimental study of the effects of wire EDM on the characteristics of ferritic steel, at a micro-scale on the contour cut surface 413

Stabilization of free CaO in molten BOF slag by addition of silica at high temperature 414

Kinetic study on compositional variations of inclusions, steel and slag during refining process 415

Preparation of industrial grade MoO2 by the reaction between industrial grade MoO3 and activated carbon 416

Study of thermogravimetric curves of LD Slag size fractions in oxygen and nitrogen atmosphere and effect of FeO and free lime on weight loss at different temperatures 417

Evolutional behavior of carbonaceous material during dissolution in molten iron of COREX 418

Improvement of hot ductility of C-Mn Steel containing arsenic by rare earth Ce 419

Product innovations of key economic importance for the steel industry 420

Coal blend properties and evaluation on the quality of stamp charging coke from weakly coking blends 421

Hypothetic impact of chemical bonding on the moisture resistance of amorphous Si_xN_yH_z by plasma-enhanced chemical vapor deposition 406

Influence of TiC_0.3N_0.7 on viscosity of TiO₂-containing slag 412

Preparation of industrial grade MoO₂ by the reaction between industrial grade MoO₃ and activated carbon 416