Microstructure and mechanical properties of 15-5 PH stainless steel under different aging temperature 601 Chunhui Jin, Honglin Zhou, Yuan Lai, Bei Li, Kewei Zhang, Huiqin Chen and Jinhua Zhao Published online: 01 October 2021 DOI: https://doi.org/10.1051/metal/2021078 Full HTMLPDF (4.978 MB)References
Preparation process of cold bonded pellets with iron-bearing dust and sludge from steel production process 602 Rui Mao, Fei Wang, Yuan Xu, Kun Ren and Guangwei Wang Published online: 01 October 2021 DOI: https://doi.org/10.1051/metal/2021077 Full HTMLPDF (1.482 MB)References
A convolutional neural network-based model for predicting lime utilization ratio in the KR desulfurization process 603 Si-wei Wu and Jian Yang Published online: 05 October 2021 DOI: https://doi.org/10.1051/metal/2021074 Full HTMLPDF (1.555 MB)References
Evolution of microstructure and texture of ultra-thin non-oriented electrical steel manufactured by CSP 604 Li-Feng Fan, Mei-Mei Qin, Xing-Yuan Zhao, Zheng-Hai Zhu, Li-Jun Xiao, Jiao-Huang and Feng-Guo Published online: 05 October 2021 DOI: https://doi.org/10.1051/metal/2021079 Full HTMLPDF (6.003 MB)References
Study on a straightening process by reciprocating bending for metal profiles 605 Qingdang Meng, Gaochao Yu, Xueying Huang, Honglei Sun and Jun Zhao Published online: 08 October 2021 DOI: https://doi.org/10.1051/metal/2021081 Full HTMLPDF (1.328 MB)References
Effect of in situ formation of tungsten semicarbide on the microstructure and mechanical properties of medium carbon steel composites 606 Nandish Girishbhai Soni, Akash Ganesh Mahajan, Kaustubh Ramesh Kambale and Sandeep Prabhakar Butee Published online: 14 October 2021 DOI: https://doi.org/10.1051/metal/2021080 Full HTMLPDF (3.742 MB)References
Effect of pretreatment on the extraction of valuable metal from vanadium-bearing titanomagnetite by ammonium sulfate roasting 607 Zhenzhong Bian, Yali Feng, Haoran Li, Qian Zhang, Chenglong Xu, Haosheng Li and Zhengyao Li Published online: 14 October 2021 DOI: https://doi.org/10.1051/metal/2021054 Full HTMLPDF (2.810 MB)References
Open Access On the mechanisms involved in the tensile strength of a dissimilar Ti6Al4V/316L laser welded assembly 608 Antoine Mannucci, Rodolphe Bolot, Iryna Tomashchuk, Alexandre Mathieu, Eugèn Cicala and Sébastien Lafaye Published online: 21 October 2021 DOI: https://doi.org/10.1051/metal/2021082 Full HTMLPDF (2.467 MB)References
Formability behavior of friction stir processed dual phase steel 609 Semih Mahmut Aktarer and Tevfik Küçükömeroğlu Published online: 09 November 2021 DOI: https://doi.org/10.1051/metal/2021083 Full HTMLPDF (9.020 MB)References
Improvement of carbon segregation in cast bloom and heredity in hot-rolled bar 610 Mengyun Zhang, Yanping Bao, Lihua Zhao and Xin Li Published online: 09 November 2021 DOI: https://doi.org/10.1051/metal/2021072 Full HTMLPDF (1.945 MB)References
The effect of casting speed on slag-inclusion defects in 1050 × 200 mm ultra-low-carbon automobile steel slabs 611 Shujun Li and Xueyan Du Published online: 11 November 2021 DOI: https://doi.org/10.1051/metal/2021084 Full HTMLPDF (1.956 MB)References
Enhancement of boron removal from metallurgical-grade silicon by titanium addition during slag refining 612 Yaqiong Li, Lifeng Zhang and Ligang Liu Published online: 11 November 2021 DOI: https://doi.org/10.1051/metal/2021085 Full HTMLPDF (2.287 MB)References
Optimization of argon injection into shroud of tundish during continuous casting: a numerical study 613 Fengjun Chang, Liangjun Li, Ran Xu, Yufen Wang and Xudong Cui Published online: 25 November 2021 DOI: https://doi.org/10.1051/metal/2021087 Full HTMLPDF (1.974 MB)References
Process optimization using grey relational analysis in dry sliding wear behavior on SiC/B4C/Talc reinforced Al 6061 hybrid metal matrix composite 614 Chellamuthu Ramesh Kumar, Subramanian Baskar, Ganesan Ramesh, Pathinettampadian Gurusamy and Thirupathy Maridurai Published online: 06 December 2021 DOI: https://doi.org/10.1051/metal/2021086 Full HTMLPDF (1.505 MB)References
Parametric effect on material removal rate and surface roughness of electrical discharge machined magnesium alloy 615 Narayanasamy Ananthi, Uthirapathi Elaiyarasan, Vinaitheerthan Satheeshkumar, Chinnamuthu Senthilkumar, Subbarayan Sathiyamurthy and Kaliyamoorthi Nallathambi Published online: 06 December 2021 DOI: https://doi.org/10.1051/metal/2021089 Full HTMLPDF (2.427 MB)References
Recent advances of silicon wafer cutting technology for photovoltaic industry 616 Changyong Chen, Meng Sun, Xiaoqing Chen, Yi Wang, Zhouhua Jiang and Jianan Zhou Published online: 06 December 2021 DOI: https://doi.org/10.1051/metal/2021091 Full HTMLPDF (3.627 MB)References