Metallurgical Research & Technology

Interfacial reactions between impurities and slag onset of Si purification by slag addition 101

Yaqiong Li, Yunlong Yu, Lifeng Zhang and Zhengtao Li

Published online: 20 December 2021

DOI: https://doi.org/10.1051/metal/2021096

• Abstract
• Full HTML
• PDF (2.830 MB)
• References

Effect of niobium and austenitizing temperature on the microstructures and properties of spray-deposited AISI M3:2 high speed steel 102

Hebin Wang, Da Hong, Longgang Hou, Li Shen, Ping Ou, LiFang Qiu, Zhigang Wang and Hongjin Zhao

Published online: 20 December 2021

DOI: https://doi.org/10.1051/metal/2021097

• Abstract
• Full HTML
• PDF (1.475 MB)
• References

Research on an external adjustment method for RPECT roll profiles based on the segmented cooling principle 103

Tingsong Yang, Yingwei Wang, Haijun Wang, Yang Hai and Fengshan Du

Published online: 20 December 2021

DOI: https://doi.org/10.1051/metal/2021098

• Abstract
• Full HTML
• PDF (1.717 MB)
• References

A simplified mathematical model for total temperature rise calculation in non-oriented silicon steel cold rolling deformation zone 104

Guomin Han, Hongbo Li, Yujin Liu, Jie Zhang, Ning Kong, Zhiyuan Hu and Lei Liu

Published online: 20 December 2021

DOI: https://doi.org/10.1051/metal/2021095

• Abstract
• Full HTML
• PDF (2.632 MB)
• References

Alkaline refining of crude lead: a method of arsenic removal and the behavior of arsenic in the process 105

Rong Zhu, Hailin Long, Haoyu Li, Huimin Xie, Shaohua Yin, Yongmi Wang, Libo Zhang and Shiwei Li

Published online: 05 January 2022

DOI: https://doi.org/10.1051/metal/2021090

• Abstract
• Full HTML
• PDF (1.571 MB)
• References

Effect of brazing temperatures on microstructure and properties of TC4/Ti₅₇Zr₁₃Cu₂₁Ni₉/316L 106

Mei Yang, Shuang Li, Xianju Zhang, Honglang Yang, Liping Nie and Xin Wu

Published online: 10 January 2022

DOI: https://doi.org/10.1051/metal/2021099

• Abstract
• Full HTML
• PDF (3.515 MB)
• References

Effect of Si-based reductive modifying auxiliary on the recovery of iron and the cementitious reactivity of modified EAF slag 107

Xiaoming Li, Yuqing Wu, Yuwei Ma, Haofeng Xie and Xiangdong Xing

Published online: 20 January 2022

DOI: https://doi.org/10.1051/metal/2021094

• Abstract
• Full HTML
• PDF (1.848 MB)
• References

Decarburisation of Fe-C alloy strips by gas–solid reaction in Ar-CO-CO₂ 108

Meijie Zhou, Liqun Ai, Lukuo Hong, Caijiao Sun, Yuqing Zhou and Fanjun Meng

Published online: 20 January 2022

DOI: https://doi.org/10.1051/metal/2021092

• Abstract
• Full HTML
• PDF (1.003 MB)
• References

Open Access

Experimental and numerical modelling of mass transfer in a refining ladle 109

Nelson Joubert, Pascal Gardin, Stéphane Popinet and Stéphane Zaleski

Published online: 20 January 2022

DOI: https://doi.org/10.1051/metal/2021088

• Abstract
• Full HTML
• PDF (1.379 MB)
• References
• Supplementary Material

Recycling of chromium sludge to promote aggregation and growth of metal during self-reduction of nickel laterite ore 110

Hui Yu, Shengqiang Song, Robert Cromarty, Guihua Hang, Qian Hu, Wenke Zhang, Dongming Liu and Zhengliang Xue

Published online: 20 January 2022

DOI: https://doi.org/10.1051/metal/2022002

• Abstract
• Full HTML
• PDF (3.218 MB)
• References

Defects analysis of the ultra-thick steel pipes using a mixed explicit–implicit FEM 111

Yong-Zheng Jiang, Ya-Fan Hu, Zhi-Gang Fu and Sheng-Shuo Zhu

Published online: 27 January 2022

DOI: https://doi.org/10.1051/metal/2021101

• Abstract
• Full HTML
• PDF (5.326 MB)
• References

Titanium-nanohydroxyapatite composites produced by ball milling and sintering: wettability, bioactivity and toxicity studies 112

Emani Siva Krishna and Gamini Suresh

Published online: 27 January 2022

DOI: https://doi.org/10.1051/metal/2022005

• Abstract
• Full HTML
• PDF (2.553 MB)
• References

Investigation on the effect of powder size on the properties of cladding layer based on RSM 113

Kun Yue, Guofu Lian, Meiyan Feng and Youji Zhan

Published online: 03 February 2022

DOI: https://doi.org/10.1051/metal/2022003

• Abstract
• Full HTML
• PDF (6.981 MB)
• References

Thermodynamics and mechanisms of silver tailings roasting processes 114

Jie Chang, Aifang Pan, Yuzhao Ma, Yue Sun, Shentao Hu and Kuimeng Li

Published online: 03 February 2022

DOI: https://doi.org/10.1051/metal/2022001

• Abstract
• Full HTML
• PDF (3.994 MB)
• References

Influence of hot forging on microstructure in double tempered H11 hot forging dies 115

Sam Joshy, Jayadevan K.R., Merin Sarah George and Benrose Prasad

Published online: 03 February 2022

DOI: https://doi.org/10.1051/metal/2022004

• Abstract
• Full HTML
• PDF (1.741 MB)
• References

Comparison study of rust layers formed on Q420 and weathering steel after 6 years of exposure in marine atmospheres 116

Yunxiang Chen, Xiaojian Xia, Yao Huang, Yicheng Hong, Deyuan Lin and Yanjin Lu

Published online: 10 February 2022

DOI: https://doi.org/10.1051/metal/2022008

• Abstract
• Full HTML
• PDF (2.830 MB)
• References

Effects of austempering time on the microstructure and properties of austempered ductile iron 117

Zhiwen Shi, Mengjie Dong, Yufu Sun, Jiangtao Ma, Xueshan Du and Jingyu Zhao

Published online: 16 February 2022

DOI: https://doi.org/10.1051/metal/2022011

• Abstract
• Full HTML
• PDF (8.835 MB)
• References

Influence of laser pre-precipitation on the corrosion resistance of Al-Zn-Mg-Cu alloy with deep cryogenic treatment 118

Siyi Ma, Ruiming Su, Kaining Wang, Lei Wang, Yingdong Qu and Rongde Li

Published online: 16 February 2022

DOI: https://doi.org/10.1051/metal/2022009

• Abstract
• Full HTML
• PDF (3.375 MB)
• References

Characterization of nanoscale precipitates and enhanced mechanical properties of high strength weld metals containing Cu additions after PWHT 119

Jiamei Wang, Xinjie Di, Chengning Li and Dongpo Wang

Published online: 16 February 2022

DOI: https://doi.org/10.1051/metal/2022007

• Abstract
• Full HTML
• PDF (5.526 MB)
• References

Research progress on granulation process of iron and steel slag 120

WenLong Lin, Hui Wang, DongHui Liu, HongWei Xing, Chao Liu, YuZhu Zhang and Shuo Li

Published online: 16 February 2022

DOI: https://doi.org/10.1051/metal/2021100

• Abstract
• Full HTML
• PDF (2.711 MB)
• References