Metallurgical Research & Technology

The effect of shot peening time on mechanical properties and residual stress in Ti-6Al-4V alloy 401

Ali Moradi, Ali Heidari, Kamran Amini, Farshid Aghadavoudi and Reza Abedinzadeh

Published online: 23 June 2022

DOI: https://doi.org/10.1051/metal/2022036

• Abstract
• Full HTML
• PDF (2.742 MB)
• References

Valuable metals recovery and vitrification of chromium-containing electroplating sludge 402

Hong-Yang Wang, Yong Hou, Guo-Hua Zhang and Kuo-Chih Chou

Published online: 28 June 2022

DOI: https://doi.org/10.1051/metal/2022042

• Abstract
• Full HTML
• PDF (2.219 MB)
• References

Microstructure analysis and mechanical characterisation of NiWCrBSi coatings produced by flame spraying 403

Abdelhek Idir, Francesco Delloro, Rassim Younes, Mohand Amokrane Bradai, Abdelhamid Sadeddine and Abderrahim Benabbas

Published online: 28 June 2022

DOI: https://doi.org/10.1051/metal/2022037

• Abstract
• Full HTML
• PDF (8.029 MB)
• References

Perspectives on the reducing CO₂ emissions of gas-based DRI in steelmaking 404

Damodar Mittal, Jayanta Kumar Kundoo, Ajay Kumar Bisen and Hari Prakash Tiwari

Published online: 29 June 2022

DOI: https://doi.org/10.1051/metal/2022040

• Abstract
• Full HTML
• PDF (1.364 MB)
• References

Toughness and fracture mechanism at low temperature of offshore engineering steel at different welding heat inputs 405

Dekun Liu, Jian Yang and Yinhui Zhang

Published online: 29 June 2022

DOI: https://doi.org/10.1051/metal/2022041

• Abstract
• Full HTML
• PDF (8.926 MB)
• References

Numerical simulation study on the effect of electrode embedded with magnesia-carbon material on DC arc characteristics 406

Zhaozhao Yan, Jiongming Zhang, Yanbin Yin, Haitao Ma, Huayang Liu and Xingxing Wu

Published online: 29 June 2022

DOI: https://doi.org/10.1051/metal/2022044

• Abstract
• Full HTML
• PDF (1.978 MB)
• References

Effect of Cr content of Fe-10Mn-xCr (x = 0.5, 1, 2, 3 and 4 masspct) on slag/steel reaction and as-cast microstructure 407

Huixiang Yu, Dexin Yang, Jiaming Zhang and Zhengzhi Zhao

Published online: 29 June 2022

DOI: https://doi.org/10.1051/metal/2022049

• Abstract
• Full HTML
• PDF (4.267 MB)
• References

Corrosion electrochemistry of metallic iron in reduced ilmenite with ammonium chloride solution 408

Fuqiang Zheng, Yufeng Guo, Shuai Wang, Feng Chen and Lingzhi Yang

Published online: 30 June 2022

DOI: https://doi.org/10.1051/metal/2022046

• Abstract
• Full HTML
• PDF (470.1 KB)
• References

Effect of build direction and surface finish on wear behavior of AlSi₁₀Mg alloy casted by laser powder bed fusion 409

Pooja Angolkar and Manzoor Hussian

Published online: 30 June 2022

DOI: https://doi.org/10.1051/metal/2022048

• Abstract
• Full HTML
• PDF (2.380 MB)
• References

Recycling of chrysotile-asbestos production waste 410

Viktor М. Shevko, Yerbol Ye. Akylbekov, Gulnara Ye. Karataeva and Alexandra D. Badikova

Published online: 06 July 2022

DOI: https://doi.org/10.1051/metal/2022050

• Abstract
• Full HTML
• PDF (1.350 MB)
• References

Formation mechanism of point-like defect in IF steel sheet during deep drawing process 411

Xiaoxuan Deng, Haibo Li, Chenxi Ji, Bin Chen, Haichen Zhou and Congcong Zhang

Published online: 06 July 2022

DOI: https://doi.org/10.1051/metal/2022052

• Abstract
• Full HTML
• PDF (2.283 MB)
• References

Effect of Al particle size on the microstructure and wear properties of the co-deposited Ni-Al composite coatings 412

Hong Wang, Chenggang Mo, Yuebo Zhou and Lina Zhang

Published online: 06 July 2022

DOI: https://doi.org/10.1051/metal/2022053

• Abstract
• Full HTML
• PDF (8.560 MB)
• References

Microstructure, mechanical and corrosion behaviour of friction stir welding of AA6061 Al alloy and AZ31B Mg alloy 413

Pradyumn Kumar Arya, Dan Sathiaraj, Neelesh Kumar Jain, Murugesan Jayaprakash and Kuldeep K. Saxena

Published online: 08 July 2022

DOI: https://doi.org/10.1051/metal/2022057

• Abstract
• Full HTML
• PDF (11.55 MB)
• References

Effect of lining refractory and high-basicity slag on non-metallic inclusions in a high carbon Al-killed steel 414

Yubao Liu, Lifeng Zhang, Gong Cheng, Qiang Ren, Wen Yang, Jujin Wang and Fengqin Liu

Published online: 11 July 2022

DOI: https://doi.org/10.1051/metal/2022058

• Abstract
• Full HTML
• PDF (4.591 MB)
• References

Mathematical model for the forced oxygen blowing decarburization process of ultra-low carbon steel during RH treatment 415

Baohui Yuan, Yang He, Jianhua Liu, Hailong Zhou and Jihong Huang

Published online: 28 July 2022

DOI: https://doi.org/10.1051/metal/2022054

• Abstract
• Full HTML
• PDF (7.200 MB)
• References

Investigation of electrode pressure parameter on mechanical properties and microstructural characteristics of spot welded DP800 steel joints 416

C. Rajarajan, P. Sivaraj, S. Raja and V. Balasubramanian

Published online: 19 July 2022

DOI: https://doi.org/10.1051/metal/2022014

• Abstract
• Full HTML
• PDF (6.892 MB)
• References

Reducing effect of biomass derived char on iron ore fines; a statistical investigation and regression modelling 417

Soumya Sahoo, Subhabrata Mishra, Sachida Nanda Sahu, Mahendra Kumar Sahoo and Shatrughan Soren

Published online: 19 July 2022

DOI: https://doi.org/10.1051/metal/2022060

• Abstract
• Full HTML
• PDF (4.231 MB)
• References

Kinetic study of control of alloy elements during electroslag remelting of Incoloy825 418

Jiantao Ju, Qidi Li, Zhihong Zhu, Kangshuai Yang and Yue Gu

Published online: 19 July 2022

DOI: https://doi.org/10.1051/metal/2022047

• Abstract
• Full HTML
• PDF (887.3 KB)
• References

Open Access

Assessment of a physical based modelling suitable to capture the mechanical behaviour at large plastic strain of aluminium alloys 419

Olivier Bouaziz and David Lloyd

Published online: 11 July 2022

DOI: https://doi.org/10.1051/metal/2022064

• Abstract
• Full HTML
• PDF (575.2 KB)
• References