Metallurgical Research & Technology

Microstructural evolution and mechanical properties of Fe-0.14C-5Mn-1Al-Ce steel during intercritical annealing 501

Zhenjiang Li, Yujing Liu, Pengju Jia, Ruyi Zhang, Chao Luo and Huiping Qi

Published online: 10 August 2022

DOI: https://doi.org/10.1051/metal/2022061

• Abstract
• Full HTML
• PDF (6.235 MB)
• References

Interfacial behaviour of the high-entropy alloy CuCoCrFeNi and TC4 joint obtained by vacuum diffusion welding 502

Xianju Zhang, Wuxing Ou and Weihao Deng

Published online: 10 August 2022

DOI: https://doi.org/10.1051/metal/2022062

• Abstract
• Full HTML
• PDF (1.297 MB)
• References

First-principles study on yttrium inclusions in micro alloyed steels 503

Changqiao Yang, Xiangjun Liu, Jichun Yang and Quanhai Yang

Published online: 10 August 2022

DOI: https://doi.org/10.1051/metal/2022063

• Abstract
• Full HTML
• PDF (884.9 KB)
• References

Hot ductility improvement of copper-arsenic steel by rare earth cerium 504

Yuyu Liang, Wenbin Xin, Jing Zhang, Qingyang Meng, Yinju Jiang and Yongchun Deng

Published online: 10 August 2022

DOI: https://doi.org/10.1051/metal/2022067

• Abstract
• Full HTML
• PDF (11.44 MB)
• References

Friction stir processing of nanofiller assisted AISI 1010 steel-CDA 101 copper dissimilar welds: a strength factor approach 505

K. Giridharan, P. Sevvel, R. Ramadoss and B. Stalin

Published online: 10 August 2022

DOI: https://doi.org/10.1051/metal/2022065

• Abstract
• Full HTML
• PDF (7.359 MB)
• References

Mathematical model of supersonic jet centerline velocity for multi-nozzle oxygen lance 506

Yanxin Li, Hongbin Jia, Guangqiang Liu and Kun Liu

Published online: 10 August 2022

DOI: https://doi.org/10.1051/metal/2022069

• Abstract
• Full HTML
• PDF (1.427 MB)
• References

Effect of B₂O₃ on the structure and properties of aluminate slag 507

Chen Zhang, Yu-qi Kong, Ting Wu, Guang-da Bao, Jie Lei and Hai-chuan Wang

Published online: 10 August 2022

DOI: https://doi.org/10.1051/metal/2022051

• Abstract
• Full HTML
• PDF (2.644 MB)
• References

Effect of eggshell waste and B₄C particles on the mechanical and tribological properties of Al7075 alloy developed by friction stir processing 508

Rishabh Dwivedi, Ashish Kumar Srivastava and Rakesh Kumar Singh

Published online: 10 August 2022

DOI: https://doi.org/10.1051/metal/2022055

• Abstract
• Full HTML
• PDF (7.990 MB)
• References

Numerical simulation and experimental study on production of high-speed steel powder by high-frequency induction melting gas atomization 509

Bo Zhao, Min Xia, Jun-Feng Wang and Chang-Chun Ge

Published online: 10 August 2022

DOI: https://doi.org/10.1051/metal/2022030

• Abstract
• Full HTML
• PDF (7.103 MB)
• References

Cause analysis of V-shaped crack pairs on drawn welding wire surface of ER70S-6 steel 510

Haitao Zhao, Shuize Wang, Junheng Gao, Jianjun Qi, Ru Su, Hongqi Zhang, Hongwei Chen, Zhiqiang Tian and Lijuan Bai

Published online: 10 August 2022

DOI: https://doi.org/10.1051/metal/2022070

• Abstract
• Full HTML
• PDF (8.389 MB)
• References

Post fire tensile properties of S355 J2 structural steel welded connections for construction industrial applications 511

M. Balakrishnan, C. Leitão, D. Craveiro, D.M. Rodrigues, A. Santiago, L.S. da Silva and Chidambaram Subramanian

Published online: 18 August 2022

DOI: https://doi.org/10.1051/metal/2022056

• Abstract
• Full HTML
• PDF (12.46 MB)
• References

Roll profile preset and control based on electronic temperature control technology 512

Yang Hai, Tingsong Yang, Haijun Wang, Zhiqiang Xu and Meichen Fan

Published online: 18 August 2022

DOI: https://doi.org/10.1051/metal/2022066

• Abstract
• Full HTML
• PDF (1.645 MB)
• References

Preparation and oxidation behavior of novel CeO₂/Y₂O₃-modified aluminide coatings on Ni using sol–gel derived/pack cementation process 513

Baisen Chen, Junsheng Meng, Zhihui Chen, Chenfan Hao, Chengshuo Li, Xiaoping Shi and Yuebo Zhou

Published online: 18 August 2022

DOI: https://doi.org/10.1051/metal/2022073

• Abstract
• Full HTML
• PDF (3.827 MB)
• References

Experimental investigation of defect formation, microstructure and mechanical properties in friction stir welding of AA5086 514

Gollo Rinu, Sandeep Singh, Yadaiah Nirsanametla, Anil Kumar Dipati, Chander Prakash and Ketan Kotecha

Published online: 07 September 2022

DOI: https://doi.org/10.1051/metal/2022068

• Abstract
• Full HTML
• PDF (7.086 MB)
• References

Predictive modeling of the hot metal silicon content in blast furnace based on ensemble method 515

Dewen Jiang, Xinfu Zhou, Zhenyang Wang, Kejiang Li and Jianliang Zhang

Published online: 07 September 2022

DOI: https://doi.org/10.1051/metal/2022074

• Abstract
• Full HTML
• PDF (1.551 MB)
• References

Characteristics and formation mechanism of MgO-enriched inclusions in 2507 super duplex stainless steel during LF refinement 516

Chen Xingrun, Qian Zhangxin and Pan Jixiang

Published online: 07 September 2022

DOI: https://doi.org/10.1051/metal/2022075

• Abstract
• Full HTML
• PDF (4.650 MB)
• References

Open Access

Phase transformation model for adjusting the cooling conditions in Stelmor process to obtain the targeted structure of thermomechanically rolled wire rod used for fastener production 517

Michal Piwowarczyk, Natalia Wolańska, Maciej Pietrzyk, Lukasz Rauch, Roman Kuziak and Wladyslaw Zalecki

Published online: 12 September 2022

DOI: https://doi.org/10.1051/metal/2022071

• Abstract
• Full HTML
• PDF (5.000 MB)
• References

Investigation of stress corrosion cracking behavior of L360QS in different groove angles by electrochemical and SSRT method 518

Junjie Huang, Mei Yang, Yongdu Li, Cengyi Wang and Shuang Li

Published online: 12 September 2022

DOI: https://doi.org/10.1051/metal/2022076

• Abstract
• Full HTML
• PDF (5.335 MB)
• References

Study on formation of dual-phase MnO–SiO₂-based inclusions in tire cord steel 519

Guodong Song, Zhiyin Deng, Lei Chen and Miaoyong Zhu

Published online: 12 September 2022

DOI: https://doi.org/10.1051/metal/2022072

• Abstract
• Full HTML
• PDF (2.611 MB)
• References

Open Access

Effect of cooling rate on the microstructures of three low carbon alloys with different manganese and molybdenum contents 520

Anna Benarosch, Bernard Marini, Caroline Toffolon-Masclet, Zofia Trzaska, Estelle Meslin and Ivan Guillot

Published online: 12 September 2022

DOI: https://doi.org/10.1051/metal/2022059

• Abstract
• Full HTML
• PDF (6.954 MB)
• References
• Supplementary Material

Efficient operation of recovery stamp charge cokemaking at JSPL: an experience 521

Vishwesh M. Shisani, Bhavendra Kumar Sahu, Hari Prakash Tiwari, Satyanarayan Singh and Damodar Mittal

Published online: 14 September 2022

DOI: https://doi.org/10.1051/metal/2022077

• Abstract
• Full HTML
• PDF (2.578 MB)
• References

Formation and evolution of non-metallic inclusions in X70MS pipeline steel during LF-RH-CC process 522

Huajun Zhong, Min Jiang, Kanghao Wang, Xinhua Wang, Shuai Liu and Jinxing Jiang

Published online: 16 September 2022

DOI: https://doi.org/10.1051/metal/2022078

• Abstract
• Full HTML
• PDF (5.600 MB)
• References

Open Access

Influence of laser powder bed fusion processing parameters on corrosion behaviour of 316L stainless steel in nitric acid 523

Beatriz Puga, Fernando Lomello, Emeline Boussac, Aziz Chniouel, Alexis Fouchereau, Pierre Laghoutaris and Hicham Maskrot

Published online: 21 September 2022

DOI: https://doi.org/10.1051/metal/2022079

• Abstract
• Full HTML
• PDF (3.767 MB)
• References

Effect of outlet characteristics and particle properties on the flow characteristics inside conical hoppers 524

Haotian Liao, Yanbing Zong, Kejiang Li, Zhisheng Bi, Chunhe Jiang, Jianliang Zhang and Shan Ren

Published online: 27 September 2022

DOI: https://doi.org/10.1051/metal/2022080

• Abstract
• Full HTML
• PDF (951.7 KB)
• References

Study on microstructure, phase transformation behavior of T15 high-speed steel and the effect of adding REEs 525

Bo Zhao, Min Xia and Chang-Chun Ge

Published online: 05 October 2022

DOI: https://doi.org/10.1051/metal/2022082

• Abstract
• Full HTML
• PDF (8.235 MB)
• References