Subscriber Authentication Point

EDPS Account

Volume 120 / No 1 (2023)

Kinetics of precipitation for graphite particle in high nickel ductile iron (© Y. Wan et al., article 101)

Metallurgical Research & Technology

Volume 120 / No 1 (2023)

Kinetics of precipitation for graphite particle in high nickel ductile iron (© Y. Wan et al., article 101)

Export the citation of the selected articles Export
Select all

Kinetics of precipitation for graphite particle in high nickel ductile iron 101

Yong Wan, Xiao Ling, Chuansheng Tang, Xuejian Zhang, Yonghong Wen, Dong Ma, Shan Gao and Qiwei Chen

Published online: 09 December 2022

DOI: https://doi.org/10.1051/metal/2022103

Effect of quenching temperature on microstructure and properties of low silicon hypereutectic high chromium cast iron 102

Xiaole Cheng, Dong Zhang, Xiaojun Wu, Guangshen Xu and Hanguang Fu

Published online: 09 December 2022

DOI: https://doi.org/10.1051/metal/2022105

Utilization of steel plant waste and by-products in reactive coke making 103

Vimal Kumar Chandaliya, Saibal Trivedy, Avinash Tiwary, Asaithambi Suresh, Pratik Swarup Dash and Abanti Sahoo

Published online: 04 January 2023

DOI: https://doi.org/10.1051/metal/2022109

Study on the positive segregation in columnar-to-equiaxed transition zone 104

Yadong Wang and Lifeng Zhang

Published online: 04 January 2023

DOI: https://doi.org/10.1051/metal/2022108

Microstructure, interfacial characteristics and wear properties of AZ31 surface selective laser cladding AlSi10Mg coatings 105

Yanling Li, Zhihui Cai, Lifeng Ma, Qihang Li, Zhanyong Zhao and Huodong Li

Published online: 04 January 2023

DOI: https://doi.org/10.1051/metal/2022095

Effect of Cr addition and heat treatment on the physical properties of Fe-Al melt-spun ribbons 106

Imad Messai, Djamel Hamana, Zehira Belamri and Volodymyr Chernenko

Published online: 04 January 2023

DOI: https://doi.org/10.1051/metal/2022097

Research on high performance control strategy of slab thickness based on T-S fuzzy control 107

Tianhao Li, Cui Guimei, Xiaoli Li, Donghao Lv and Yong Zhang

Published online: 04 January 2023

DOI: https://doi.org/10.1051/metal/2022104

Free Access

History of the iron furnace using the physical-chemical blast furnace model 108

Rémy Nicolle

Published online: 04 January 2023

DOI: https://doi.org/10.1051/metal/2022098

Prediction of end-point LF refining furnace based on wavelet transform based weighted optimized twin support vector machine algorithm 109

Chunyang Shi, Xinxin Yin, Ren Chen, Ruxin Zhong, Peng Sun, Baoshuai Wang, Shiyu Guo, Shengdong Li and Zhicai Ma

Published online: 01 February 2023

DOI: https://doi.org/10.1051/metal/2022107

The quantitative model of hearth activity based on data mining and characteristics of deadman 110

Yong Deng, Ran Liu, Tao Li, Ke-xin Jiao, Sai Meng and Zi-yu Guo

Published online: 01 February 2023

DOI: https://doi.org/10.1051/metal/2023002

Formation mechanism and control strategy of M-shaped and W-shaped profile defects in hot rolling of aluminum plate 111

Chao Liu, Hairui Wu, Anrui He, Wenhao Han, Bo Ma and Huixia Zhang

Published online: 01 February 2023

DOI: https://doi.org/10.1051/metal/2022110

Numerical modeling of grade mixing and inclusion entrapment in eight strand billet tundish 112

Sicheng Song, Yanhui Sun and Hanghang An

Published online: 03 February 2023

DOI: https://doi.org/10.1051/metal/2023006

Thermodynamic and experimental substantiation for obtaining ferrosilicon from tripoli 113

Nurseiit M. Mirkayev, Viktor M. Shevko, Dosmurat K. Aitkulov and Alexandra D. Badikova

Published online: 15 February 2023

DOI: https://doi.org/10.1051/metal/2023003

Investigation on the pitting corrosion properties of welded joints of bimetal composite pipe 114

Liangwen Liu, Yang Li, Xianjv Zhang, Jingyi Wang, Junjie Huang, Yongdu Li, Zhizhong Lv and Mei Yang

Published online: 15 February 2023

DOI: https://doi.org/10.1051/metal/2023010

Development of low-cost weathering steel for photovoltaic supports 115

Guannan Li, Xiaopei Guo, Tao Li and Shuoyang Wang

Published online: 22 February 2023

DOI: https://doi.org/10.1051/metal/2023009

Numerical simulation of macrosegregation heredity on TC4 titanium alloy ingot by vacuum arc remelting 116

Jing Zhenquan, Yanhui Sun and Sicheng Song

Published online: 22 February 2023

DOI: https://doi.org/10.1051/metal/2023012

Open Access

Analysis of the microstructural features of phase transformation during hardening processes of 3 martensitic stainless steels 117

Thiago Santos, Danièle Chaubet, Tony Da Silva Botelho, Guillaume Poize and Brigitte Bacroix

Published online: 22 February 2023

DOI: https://doi.org/10.1051/metal/2022094

Effect of rotational speed and copper interlayer on the mechanical and fracture behaviour of friction stir spot welds of 5754 aluminium alloy 118

Ramzi Gassaa, Larbi Hemmouche, Riad Badji, Lionel Gilson, Luc Rabet and Oussama Mimouni

Published online: 22 February 2023

DOI: https://doi.org/10.1051/metal/2023014

Fabrication and optimization of AA5754/SiC nanocomposites via friction-stir processing (FSP) 119

Morteza Rezaei, Ali Davari, Seyyed Saber Mirhosseini and Ali Shamsipur

Published online: 22 February 2023

DOI: https://doi.org/10.1051/metal/2023015