Microstructural investigations on laser welded Al-30wt.% B4C composite 201 Yunjiang Li, Guomin Le, Pengcheng Zhang, Yajiang Xian, Zuqi Hu and Xiaoxuan Pang Published online: 07 March 2023 DOI: https://doi.org/10.1051/metal/2023008 AbstractFull HTMLPDF (6.101 MB)References
Effect of Ca/Fe additives on the serial reactions of coke and sinter with CO2 202 Zhang Sun, Jiawei Han, Yang Sun, Minghui Dou, Rui Guo and Yinghua Liang Published online: 07 March 2023 DOI: https://doi.org/10.1051/metal/2023005 AbstractFull HTMLPDF (1.972 MB)References
A study on mechanical and microstructure behaviour of carbon and glass fibre reinforced Al 2024-T3 laminated composite 203 Gurunathan Saravanan, G. B. Bhaskar, Uthirapathi Elaiyarasan and Raman Mookkan Alagu Published online: 07 March 2023 DOI: https://doi.org/10.1051/metal/2023001 AbstractFull HTMLPDF (5.734 MB)References
Dependency of mechanical properties on artificial aging conditions for EN AW 6082 aluminum alloy 204 Mehmet Okan Görtan and Berkay Yüksel Published online: 07 March 2023 DOI: https://doi.org/10.1051/metal/2023017 AbstractFull HTMLPDF (3.410 MB)References
Investigation of microstructural, mechanical and tribological properties of Al356/3-9%ZrB2 composites produced by the stir casting process 205 Y. Zakerinia, E. Jafari, A. Khosravifard and N. Hosseinabadi Published online: 08 March 2023 DOI: https://doi.org/10.1051/metal/2023004 AbstractFull HTMLPDF (11.96 MB)References
Investigation of cold cracking resistance of HSLA 950A steel by taguchi optimization technique 206 Manivel Muralidaran Velumani, Senthilkumar Krishnasamy, Seranthian Ramanathan and Chidambaram Subramanian Published online: 08 March 2023 DOI: https://doi.org/10.1051/metal/2023018 AbstractFull HTMLPDF (1.076 MB)References
Comprehensive utilization of valuable elements in brass alloy rods production through recovery of copper scraps 207 Yitong Xie, Lixia Shi, Yaqiong Li, Zhixiang Fu and Lifeng Zhang Published online: 19 April 2023 DOI: https://doi.org/10.1051/metal/2022106 AbstractFull HTMLPDF (2.901 MB)ReferencesSupplementary Material
Review Influence of casting speed change and submerged entry nozzle offset on mold flow field in unsteady-state continuous casting process 208 Zhiqing Lin, Jian Yang, Fuxiang Huang, Keran Zhu, Jian Gong, Zhentong Liu and Fenggang Liu Published online: 31 March 2023 DOI: https://doi.org/10.1051/metal/2023020 AbstractFull HTMLPDF (4.091 MB)References
Kinetics of isothermal growth of Ulvöspinel (Fe3-xTixO4) in Ti-bearing blast furnace slag with Fe2O3 powder additive 209 Youyu Li and Baijun Yan Published online: 31 March 2023 DOI: https://doi.org/10.1051/metal/2023019 AbstractFull HTMLPDF (1.662 MB)References
Review Study on the influence of the shape and properties of Q345R welded joints on stress concentration and fatigue life 210 Rui Ma, Yu Zhang, Jun Zhao and Chenxing Zhang Published online: 06 April 2023 DOI: https://doi.org/10.1051/metal/2023021 AbstractFull HTMLPDF (2.091 MB)References
Microstructure and wear analysis of CoWC alloy layers deposited by PTA process 211 Murat Ozabaci, Tanju Teker and S. Osman Yılmaz Published online: 12 April 2023 DOI: https://doi.org/10.1051/metal/2023007 AbstractFull HTMLPDF (3.118 MB)References
Influence of Cu and Sn on the microstructure and properties of antibacterial ferritic stainless steel 212 Yang Li, Changyong Chen, Lu Bai, Ju Wang, Qi Wang, Shuai Ma and Zhouhua Jiang Published online: 12 April 2023 DOI: https://doi.org/10.1051/metal/2023013 AbstractFull HTMLPDF (11.66 MB)References
Consideration of long campaign based on analysis of 4038 m3 blast-furnace hearth core investigation 213 Zhe Jiang, Tianyong Guo, Daichao Hu, Minghui Xie, Bingnan Liu and Shuo Yao Published online: 12 April 2023 DOI: https://doi.org/10.1051/metal/2023027 AbstractFull HTMLPDF (2.635 MB)References
DEM study of the effect of different chute conditions on burden distribution during charging process blast furnace 214 Xiaoman Cheng and Shusen Cheng Published online: 12 April 2023 DOI: https://doi.org/10.1051/metal/2023026 AbstractFull HTMLPDF (2.675 MB)References
Effects of Zn, Nd, and Ca addition on the microstructure, mechanical and corrosion properties of biodegradable Mg-Ag alloys 215 Yunus Turen and Levent Elen Published online: 12 April 2023 DOI: https://doi.org/10.1051/metal/2022111 AbstractFull HTMLPDF (7.898 MB)References
Open Access Thermal conductivity of alumina-carbon composite brick and its related phase analysis in a dissected blast furnace 216 Cui Wang, Jian Cao, Jianliang Zhang, Ziyu Guo, Kexin Jiao and Yongan Zhao Published online: 18 April 2023 DOI: https://doi.org/10.1051/metal/2023033 AbstractFull HTMLPDF (2.775 MB)References
Effects of graphite nodule count on microstructural homogeneity of austempered ductile iron (ADI) 217 Zhitao Hu, Xin Wang, Yuzhou Du, Chen Liu, Zhijie Gao, Jiaze Li and Bailing Jiang Published online: 18 April 2023 DOI: https://doi.org/10.1051/metal/2023031 AbstractFull HTMLPDF (6.876 MB)References
Modeling study of EMBr effects on molten steel flow, heat transfer and solidification in a continuous casting mold 218 Lin Xu, Qunwu Pei, Zefeng Han, Engang Wang, Jianyu Wang and Christian Karcher Published online: 18 April 2023 DOI: https://doi.org/10.1051/metal/2023016 AbstractFull HTMLPDF (4.528 MB)References
Effect of Al and Ti addition on the characteristics of oxide inclusions in Ni-based superalloy 219 Linzhu Wang, Yin Zhang, Chaoyi Chen, Xiang Li, Junqi Li and Shufeng Yang Published online: 18 April 2023 DOI: https://doi.org/10.1051/metal/2023022 AbstractFull HTMLPDF (1.162 MB)References