Open Access

This article has an erratum: [https://doi.org/10.1051/metal/2024031]


Issue
Metall. Res. Technol.
Volume 121, Number 3, 2024
Article Number 308
Number of page(s) 13
DOI https://doi.org/10.1051/metal/2024027
Published online 19 April 2024
  1. S.L. Moraes, J.R.B. Lima, T.R. Ribeiro, Iron ore pelletizing process: an overview, in iron ores and iron oxide materials, IntechOpen 2018 [Google Scholar]
  2. S. Forsmo, Influence of green pellet properties, Department of Chemical Engineering and Geosciences, Lulea University of Technology, 2007 [Google Scholar]
  3. M. Athayde, S.F. Nunes, M.C. Bagatine, A case study of pellet size fraction influence on pelletizing operation, Mineral Process. Extract. Metall. Rev. 39 (4), 276–283 (2018) [CrossRef] [Google Scholar]
  4. A.M. Nyembwe, R.D. Cormarty, A.M. Garbers-Craig, Relationship between iron ore granulation mechanisms, granule shapes, and sinter bed permeability, Mineral Process. Extract. Metall. Rev. 38 (6), 388–402 (2017) [CrossRef] [Google Scholar]
  5. K. Meyer, Pelletizing of iron ore fines, Springer -Cerlag, Berlin, Heidelberg and verlag stahleisen mbH: Frankfurt, 1980 [Google Scholar]
  6. B.B. Silva, Modelling and optimization of green pellets classification on roller screens using the discrete element method, in: COPPE. UFRJ, 2017, p. 143 [Google Scholar]
  7. V.A. Goncharenko, V.G. Balandin, V.N. Peretyaka, A.A. Dovzhenko, E.A. Sychev, M.L. Ishnevetskii, S.A. Trebukov, F.M. Zhuravlev, A.A. Davidyuk, A.V. Malinovskii, A.B. Zhukov, Roller screening for raw pellets. Metallurgist, 25, 455–457. 1981 [CrossRef] [Google Scholar]
  8. A.F.F. Cruz, J.M. Santos, Estudo das causas do fenômeno de agregação de minério em rolos de mesas classificadoras do pelotamento, 7° Simpósio Brasileiro de Aglomeração de Minérios 7 (7), 302–315 (2019) [Google Scholar]
  9. G.C. Carter, F. Wright, Analysis of Sintering and pelletising including laboratory investigations, Institution of the Mining and Metallurgical Society. Proc. Syrup.: Advances in Extractive Metallurgy, 1967, p. 89–113 [Google Scholar]
  10. P.E. Wellstead, M. Cross, N. Munro, D. Ibrahim, On the design and assessment of control schemes for balling-drum circuits used in pelletising, Int. J. Mineral Process. 5, 45–67 (1978) [CrossRef] [Google Scholar]
  11. I. Dias, F. Guimarães, M. Souza, Sistema de controle granulométrico de pelotas de minério de ferro: um estudo de caso (2018) [Google Scholar]
  12. A.P. Matos, Influência da Temperatura, Pressão, Produção e Granulometria no Processo de Secagem das Pelotas Cruas, in: Mestrado em Engenharia de Materiais − Escola de Minas. Universidade Federal de Ouro Preto: Ouro Preto, 2007 [Google Scholar]
  13. J.C. Williams, The segregation of particulate materials: a review, Powder Technol. 15 (2), 245–251 (1976) [CrossRef] [Google Scholar]
  14. J.A. Drahun, J. Bridgwater, The mechanisms of free surface segregation, Powder Technol. 36 (1), 39–53 (1983) [CrossRef] [Google Scholar]
  15. D. Zhang, Z. Zhou, D. Pinson, DEM simulation of particle stratification and segregation in stockpile formation, EPJ Web Conf. 140 15018–15021 (2017) [Google Scholar]
  16. R. Hogg, Mixing and segregation in powders: evaluation, mechanisms and processes, KONA Powder Particle J. 27 3–17 (2009) [CrossRef] [Google Scholar]
  17. F. Bérubé, M. Dubé, Green Ball Screening on Roller Decks, in 3rd Symposium on Iron Ore Pelletizing, Corem, 2013 [Google Scholar]
  18. D. Cherepakha, J. Johnson, A. Kulchitsky, Examining roller screen performance to categorize iron ore green pellets to optimize pellet induration, in: Proceedings of the 8th international conference on discrete element methods (DEM8), 2019 [Google Scholar]
  19. A.B. Kotta, A. Patra, M. Kumar, S.K. Karak, Effect of molasses binder on the physical and mechanical properties of iron ore pellets, Int. J. Miner. Metall. Mater. 26 (1), 41 (2019) [CrossRef] [Google Scholar]
  20. B.B. Silva, E.R. Cunha, R.M. Carvalho, L.M. Tavares, Modeling and simulation of green iron ore pellet classification in a single deck roller screen using the discrete element method, Powder Technol. 332, 359–370 (2018) [CrossRef] [Google Scholar]
  21. A.G. Andrade, S. Beaudin, M. Athayde, Impact of key parameters on the iron ore pellets roller screening performance, Metall. Res. Technol. 119 (2022) [Google Scholar]
  22. B.B. Silva, E.R. Cunha, R.M. Carvalho, L.M. Tavares, Improvement in roller screening of green iron ore pellets by statistical analysis and discrete element simulations, Mineral Process. Extract. Metall. Rev. 41 (5), 323–334 (2019) [Google Scholar]
  23. X.-D. Yang, L-L. Zhao, H-X. Li, C-S. Liu, E-Y. Hu, Y-W. Li, Q-F. Hou, DEM study of particles flow on an industrial-scale roller screen, Adv. Powder Technol. 31 (11), 4445–4456 (2020) [CrossRef] [Google Scholar]
  24. B.B. Silva, E.R. Cunha, R.M. Carvalho, L.M. Tavares, Modelamento da classificação de pelotas verdes de minério de ferro em peneiras de rolos pelo método dos elementos discretos, in: 5° Simpósio Brasileiro de Aglomeração de Minério de Ferro. ABM proceedings, São Paulo, SP, Brasil, 2017 [Google Scholar]
  25. S. Beaudin, E. Godin, Triple Deck roller feeder, a positive impact on pellet production, fired pellet quality and energy savings, in: MinExpo, 2021 [Google Scholar]
  26. S. Ergun, Fluid flow through packed columns, Chem. Eng. Progress. 48, 89–94 (1952) [Google Scholar]
  27. J. Kozeny, Ueber kapillare Leitung des Wassers im Boden, Sitzungsber Akad. Wiss. 136 2a) , 271–306 (1927) [Google Scholar]
  28. R.M. Carvalho, A.D. Thomazini, B.B. Silva, L.M. Tavares, Simulation of classification and stratification in double-deck roller screening of green iron ore pellets using DEM, Trans. Indian Inst. Metals (2023) [Google Scholar]
  29. J. Akbar, S.N. Vahid, Employing DEM to study the impact of different parameters on the screening efficiency and mesh wear, Powder Technol. 297, 126–143 (2016) [CrossRef] [Google Scholar]
  30. M. Javaheri, A. Jafari, G. Baradaran, S.A. Hossein, Effects of rollers speed regime on the roller screen efficiency, Mineral Process. Extract. Metall. Rev. 43 648–655 (2022) [CrossRef] [Google Scholar]
  31. A. Kondratiev, S. Smorodov, V. Antsev, A. Kiricheck, Improving the efficiency of the roller screen with circular disks, MATEC Web Conf. 224, 2068–2072 (2018). [Google Scholar]
  32. A.D. Thomazini, Modelagem e simulação da degradação de pelotas verdes de minério de ferro em operações de pelotização pelo método de elementos discretos. UFRJ/COPPE, 2020, p. 144 [Google Scholar]
  33. M. Dubé, Project R106, Monitoring and improvement of bed permeability in the iron ore pellet induration process, Report 4 − Models predicting bed permeability − off and on-line, Confidential report Corem, Corem, 2008 [Google Scholar]
  34. IPCC, Climate change 2013 The physical science basis. Contribution of working group I to the fifth assessment report of the Intergovernmental Panel on Climate Change. Cambridge University Press: United Kingdom and New York, NY, USA, 2013 [Google Scholar]
  35. Canada Government. Facteurs d’émission et de conversion. Accessed in 29 december 2022 Available at: https://transitionenergetique.gouv.qc.ca/fileadmin/medias/pdf/FacteursEmission.pdf. (2019) [Google Scholar]
  36. Canada Government, Emission factors and reference values, E.e.c.c. Canada, Editor. https://publications.gc.ca/site/eng/9.911206/publication. html (2022) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.