EDP Sciences logo
Subscriber Authentication Point
Sciengine logo
Search
Menu
All issues Volume 122 / No 6 (2025) Metall. Res. Technol., 122 6 (2025) 603 References
Issue
Metall. Res. Technol.
Volume 122, Number 6, 2025
Special Issue on ‘Advances in Powder Technologies: Highlights from EuroPM2025’, edited by Efrain Carreño-Morelli, Elena Gordo and Lars Nyborg
Article Number 603
Number of page(s) 11
DOI https://doi.org/10.1051/metal/2025078
Published online 16 September 2025
  1. S. Majumdar, A. Sinha, A. Das et al., An insight view of evolution of advanced aluminum alloy for aerospace and automotive industry: current status and future prospects, J. Inst. Eng. India Ser. D, 105, 1–17 (2024) [Google Scholar]
  2. S.S. Li, X. Yue, Q.Y. Li et al., Development and applications of aluminum alloys for aerospace industry, J. Mater. Res. Technol. 27, 944 (2023) [Google Scholar]
  3. A.C.U. Rao, V. Vasu, M. Govindaraju et al., Stress corrosion cracking behavior of 7xxx aluminum alloys: a literature review, Trans. Nonferrous Met. Soc. China 26, 1447 (2016) [Google Scholar]
  4. M.S.K.K.Y. Nartu, P. Agrawal, Additive manufacturing of metal matrix composites, Mater. Des. 252, 113609 (2025) [Google Scholar]
  5. C. Monti, M. Turani, K. Papis et al., A new Al-Cu alloy for LPBF developed via ultrasonic atomization, Mater. Des. 229, 111907 (2023) [Google Scholar]
  6. M. Genc. P. Eloi, J.J. Blandin et al., Optimization of the strength vs. conductivity trade-off in an aluminium alloy designed for laser powder bed fusion, Mater. Sci. Eng. A 858, 144139 (2022) [Google Scholar]
  7. A. Martin, M. Vilanova, E. Gil et al., Influence of the Zr content on the processability of a high strength Al-Zn-Mg-Cu-Zr alloy by laser powder bed fusion, Mater. Charact. 183, 111650 (2022) [Google Scholar]
  8. G. Li, S.D. Jadhav, A. Martín et al., Investigation of solidification and precipitation behavior of Si-modified 7075 aluminum alloy fabricated by laser-based powder bed fusion, Metall. Mater. Trans. A 52, 194 (2021) [Google Scholar]
  9. S. Rangrej, S. Pandya, J. Menghani, Effects of reinforcement additions on properties of aluminium matrix composites − a review, Mater. Today Proc. 44, 637 (2021) [Google Scholar]
  10. Z. Wang, L. Zhuo, E. Yin et al., Microstructure evolution and properties of nanoparticulate SiC modified AlSi10Mg alloys, Mater. Sci. Eng. A 808, 140864 (2021) [Google Scholar]
  11. X. Sun, S. Zou, F. Wang et al., Role of TiC on the microstructure, tensile property and thermal stability of laser powder bed fusion fabricated AlSi10Mg alloy, Mater. Sci. Eng. A 915, 147182 (2024) [Google Scholar]
  12. X. Wen, Q. Wang, Q. Mu et al., Laser solid forming additive manufacturing TiB2 reinforced 2024Al composite: microstructure and mechanical properties, Mater. Sci. Eng A 745, 319 (2019) [Google Scholar]
  13. T. Sun, H. Wang, Z. Gao et al., The role of in-situ nano-TiB2 particles in improving the printability of noncastable 2024Al alloy, Mater. Res. Lett. 10, 656 (2022) [Google Scholar]
  14. Q. Z. Wang, X. Lin, N. Kang et al., Effect of laser additive manufacturing on the microstructure and mechanical properties of TiB2 reinforced Al-Cu matrix composite, Mater. Sci. Eng. A 840, 142950 (2022) [Google Scholar]
  15. D. Dey, A. Biswas, Comparative study of physical, mechanical and tribological properties of Al2024 alloy and SiC-TiB2 composites, Silicon. 13, 1895 (2021) [Google Scholar]
  16. Z. Liang, J. Qi, K.G. Prashanth et al., Microstructure and mechanical properties of TiB2/Al-5Cu composites fabricated by multi-material laser powder bed fusion, Opt. Laser Technol. 181, 111922 (2025) [Google Scholar]
  17. V. Ndou, O.O. Ayodele, B.J. Babalola et al., Investigating the effect of ceramic-reinforcements on aluminum matrix fabricated by pulsed electric current sintering, Mater. Today Proc. 62, S189 (2022) [Google Scholar]
  18. N. Kekana, M.B. Shongwe, K. Mpofu et al., Characterization of aluminium-based alloy starting powders morphology for the synthesis of rail components through selective laser melting, Procedia CIRP. 120, 1564 (2023) [Google Scholar]
  19. M. Marigo, M. Davies, T. Leadbeater et al., Application of positron emission particle tracking (PEPT) to validate a discrete element method (DEM) model of granular flow and mixing in the Turbula mixer, Int. J. Pharm. 446, 46 (2013) [Google Scholar]
  20. Q. Tan, Y. Liu, Z. Fan et al., Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy, J. Mater. Sci. Technol. 58, 34 (2020) [Google Scholar]
  21. M. Kumar, G.J. Gibbons, A. Das et al., Additive manufacturing of aluminium alloy 2024 by laser powder bed fusion: microstructural evolution, defects and mechanical properties, Rapid Prototyp. J. 27, 1388 (2021) [Google Scholar]
  22. H. Yang, J. Sha, D. Zhao et al., Defects control of aluminum alloys and their composites fabricated via laser powder bed fusion: a review, J. Mater. Process. Technol. 319, 118064 (2023) [Google Scholar]
  23. W.Y.J. Jian, C.W. Cheng, W.C. Chang et al., Fabrication of crack-free Nd-Fe-B magnets with laser powder bed fusion, Materialia. 21, 101351 (2022) [Google Scholar]
  24. Y.W. Guo, W. Wei, W. Shi et al., Selective laser melting of Er modified AlSi7Mg alloy: Effect of processing parameters on forming quality, microstructure and mechanical properties, Mater. Sci. Eng. A 842, 143085 (2022) [Google Scholar]
  25. P. Wang, C. Gammer, F. Brenne et al., A heat treatable TiB2/Al-3. 5Cu-1.5Mg-1Si composite fabricated by selective laser melting: microstructure, heat treatment and mechanical properties, Compos. Part B Eng. 147, 162 (2018) [Google Scholar]
  26. J. Zhang, J. Gao, S. Yang et al., Breaking the strength-ductility trade-off in additively manufactured aluminum alloys through grain structure control by duplex nucleation, J. Mater. Sci. Technol. 152, 201 (2023) [Google Scholar]
  27. P. Mair, L. Kaserer, J. Braun et al., Microstructure and mechanical properties of a TiB2-modified Al-Cu alloy processed by laser powder-bed fusion, Mater. Sci. Eng. A 799, 140209 (2021) [Google Scholar]
  28. T. Sun, J. Chen, Y. Wu et al., Achieving excellent strength of the LPBF additively manufactured Al-Cu-Mg composite via in-situ mixing TiB2 and solution treatment, Mater. Sci. Eng. A 850, 143531 (2022) [Google Scholar]
  29. R. Gómez, J. Aranzabe, F. Garciandia et al., Investigation of the impact of process parameters and thermal treatments on mechanical properties and microstructure of ScanCromAl ® manufactured via powder bed fusion laser beam process, J. Mater. Res. Technol. 33, 1961 (2024) [Google Scholar]
  30. M. Bärtl, X. Xiao, J. Brillo et al., Influence of surface tension and evaporation on melt dynamics of aluminum alloys for laser powder bed fusion, J. Mater. Eng. Perform. 31, 6221 (2022) [Google Scholar]
  31. A.B. Spierings, K. Dawson, T. Heeling et al., Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting, Mater. Des. 115, 52 (2017) [Google Scholar]
  32. H. Zhang, H. Zhu, T. Qi et al., Selective laser melting of high strength Al-Cu-Mg alloys: processing, microstructure and mechanical properties, Mater. Sci. Eng. A 656, 47 (2016) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.