| Issue |
Metall. Res. Technol.
Volume 122, Number 6, 2025
Special Issue on ‘Advances in Powder Technologies: Highlights from EuroPM2025’, edited by Efrain Carreño-Morelli, Elena Gordo and Lars Nyborg
|
|
|---|---|---|
| Article Number | 604 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/metal/2025079 | |
| Published online | 16 September 2025 | |
- P. Li, Y. Han, H. Zhang, Performance assessment of a molten hydroxide direct carbon fuel cell-based hybrid system coupled with a two-stage thermoelectric generator, Int. J. Electrochem. Sci. 18, 100016 (2023) [Google Scholar]
- A.C. Rady, S. Giddey, A. Kulkarni et al., Catalytic gasification of carbon in a direct carbon fuel cell, Fuel 180, 270–277 (2016) [Google Scholar]
- D. Cao, Y. Sun, G. Wang, Direct carbon fuel cell: Fundamentals and recent developments, J Power Sources 167, 250–257 (2007) [Google Scholar]
- S. Giddey, S.P.S. Badwal, A. Kulkarni et al., A comprehensive review of direct carbon fuel cell technology, Prog. Energy Combust. Sci. 38, 360–399 (2012) [Google Scholar]
- L. Kouchachvili, P. Geddis, Q. Zhuang, Direct carbon fuel cell design for continuous operation, Int. J. Hydrogen Energy 46, 6792–6802 (2021) [Google Scholar]
- H. Gu, N. Wang, S. Liu, Characterization of Bayer red mud from Guizhou, China, Minerals Metall. Process. 29, 169–171 (2012) [Google Scholar]
- M. Zia-Ur-Rehman, H. Khalid, M. Rizwan et al., Inorganic amendments for the remediation of cadmium-contaminated soils, cadmium tolerance in plants: agronomic, Mol. Signal. Omic Approach. 113–141 (2019). https://doi.org/10.1016/B978-0-12-815794-7.00004-7 [Google Scholar]
- M.A. Khairul, J. Zanganeh, B. Moghtaderi, The composition, recycling and utilisation of Bayer red mud, Resour. Conserv. Recycl. 141, 483–498 (2019) [Google Scholar]
- E. Mukiza, L.L. Zhang, X. Liu et al., Utilization of red mud in road base and subgrade materials: a review, Resour. Conserv. Recycl. 141, 187–199 (2019) [Google Scholar]
- S. Eom, J. Cho, S. Ahn et al., Comparison of the electrochemical reaction parameter of graphite and sub-bituminous coal in a direct carbon fuel cell, Energy Fuels 30, 3502–3508 (2016) [Google Scholar]
- M. Zago, N.F.M. Lecis, M. Vedani et al., Dimensional and geometrical precision of parts produced by binder jetting process as affected by the anisotropic shrinkage on sintering, Addit. Manuf. 43, 102007 (2021) [Google Scholar]
- Z. Chen, B. Wan, J. Liu et al., Sintering densification mechanism of binder jet 3D printing 316L stainless steel parts via dimensional compensation technology, J. Mater. Res. Technol. 33, 3296–3307 (2024) [Google Scholar]
- K. Esmati, A. Chakraborty, S. Pendurti et al., Anisotropic sintering behavior of stainless steel 316L printed by binder jetting additive manufacturing, Mater Today Commun. 41, 110528 (2024) [Google Scholar]
- H. Miyanaji, N. Momenzadeh, L. Yang, Effect of printing speed on quality of printed parts in binder jetting process, Addit. Manuf. 20, 1–10 (2018) [Google Scholar]
- T. Dahmen, W.E. Alphonso, C.G. Klingaa et al., Evaluating the scalability of channels made by Binder Jetting and Laser Powder Bed Fusion using an X-ray CT and image analysis approach, in 2022 ASPE and euspen Summer Topical Meeting on Advancing Precision in Additive Manufacturing. vol. 77, American Society for Precision Engineering, Knoxville, Tennessee, United States (2022) pp. 24–29. [Google Scholar]
- H. Guo, J. Qin, S. Zhou et al., A low-binder-content ink system for 3D printing high-density and small feature size 316L stainless steel parts, Adv. Eng. Mater. 25, 2300558 (2023) [Google Scholar]
- G. Dall’osto, D. Mombelli, A. Pittalis et al., Biochar and other carbonaceous materials used in steelmaking: possibilities and synergies for power generation by direct carbon fuel cell, Biomass Bioenergy 177, 106930 (2023) [Google Scholar]
- D. Mombelli, S. Barella, A. Gruttadauria et al., Iron recovery from Bauxite Tailings Red Mud by thermal reduction with blast furnace sludge, Appl. Sci. (Switzerland) 9 (2019). https://doi.org/10.3390/APP9224902 [Google Scholar]
- D. Mombelli, C. Mapelli, C. Di Cecca et al., Riduzione di fanghi rossi d’allumina mediante fanghi d’altoforno per la produzione di ghisa, La Metall. Italiana 108, 23–41 (2017) [Google Scholar]
- F. Bertolini, M. Mariani, E. Mercadelli et al., 3D printing of potassium sodium niobate by binder jetting: Printing parameters optimisation and correlation to final porosity, J. Mater. Res. Technol. 29, 4597–4606 (2024) [Google Scholar]
- R. Jiang, L. Monteil, K. Kimes et al., Influence of powder type and binder saturation on binder jet 3D-printed and sintered Inconel 625 samples, Int. J. Adv. Manufactur. Technol. 116, 3827–3838 (2021) [Google Scholar]
- N.B. Crane, Impact of part thickness and drying conditions on saturation limits in binder jet additive manufacturing, Addit. Manuf. 33, 101127 (2020) [Google Scholar]
- M. Zago, N. Lecis, M. Mariani et al., Analysis of the causes determining dimensional and geometrical errors in 316L and 17-4PH stainless steel parts fabricated by metal binder jetting, Int. J. Adv. Manufactur. Technol. 132, 835–851 (2024) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.