EDP Sciences logo
Subscriber Authentication Point
Sciengine logo
Search
Menu
All issues Volume 122 / No 6 (2025) Metall. Res. Technol., 122 6 (2025) 605 References
Issue
Metall. Res. Technol.
Volume 122, Number 6, 2025
Special Issue on ‘Advances in Powder Technologies: Highlights from EuroPM2025’, edited by Efrain Carreño-Morelli, Elena Gordo and Lars Nyborg
Article Number 605
Number of page(s) 9
DOI https://doi.org/10.1051/metal/2025081
Published online 16 September 2025
  1. European Commitee for Standardization, DIN EN 1993-1-9:2023-3-Design of steel structures − Part 1-1: General rules and rules for buildings (2023) DIN EN 1993-1–9 [Google Scholar]
  2. European Commitee for Standardization, DIN EN 1999-1-3:2024-11-Design of aluminium structures − Part 1-3: Structures susceptible to fatigue (2024) [Google Scholar]
  3. European Standard, EN 13001-3-1:2019-3-Cranes D General Design D Part 3-1: Limit States and proof competence of steel structure (2019) [Google Scholar]
  4. R. Rennert, E. Kullig, M. Vormwald et al., Analytical strength assessment of components: FKM Guideline, 7th Edition, VDMA, Frankfurt am Main (2020) [Google Scholar]
  5. DNV, RP-C203: Fatigue design of offshore steel structures (2024), DNV-C203:2024-10 [Google Scholar]
  6. Normenausschuss Chemischer Apparatebau (FNCA) and DIN Deutsches Institut für Normung e.V., EN 13445-3:2018: Unfired pressure vessels, Part 3: Design (2018) [Google Scholar]
  7. A.F. Hobbacher, J. Baumgartner, Recommendations for Fatigue Design of Welded Joints and Components, Springer Nature Switzerland, Cham (2024) [Google Scholar]
  8. C.M. Sonsino, Fatigue design of high loaded PM parts, Metal Powder Report 5, 32–40 (1996) [Google Scholar]
  9. K. Lipp, J. Baumgartner, P. Beiss, Fatigue design of sintered steel components: effect of stress concentrations and mean stresses on local strength using highest stressed volume approach, Powder Metall. 56, 337–341 (2013) [Google Scholar]
  10. E.A. Sager, R.I. Stephens, T. Prucher, Influence of density and sintering temperature on monotonic, cyclic, and low cycle fatigue behaviour of FL4405 high strength PM steel, Powder Metall. 41, 103–108 (1998) [Google Scholar]
  11. K. Burkamp, P. Beiss, F.-C. Reissner et al., FKM-Vorhaben Nr. 614: Bauteilfestigkeit von wärmebehandeltem Sinterstahl (2022) [Google Scholar]
  12. R. Rennert, M. Vormwald, A. Esderts, FKM-guideline “Analytical strength Assessment” − Background and current developments, Int. J. Fatigue 182, 108165 (2024) [Google Scholar]
  13. W. Hanel, M. Vormwald, A. Esderts et al., AiF 15361: Ein verbessertes Berechnungskonzept des statischen Festigkeitsnachweises und des Ermüdungsnachweises für nichtgeschweißte und geschweißte Maschinenbauteile nach der FKM Richtlinie “Festigkeitsnachweis” (engl.: An improved calculation concept for the static strength verification and fatigue verification of non-welded and welded machine components according to the FKM Guideline “Strength Assessment.”) (2009) [Google Scholar]
  14. M. Schneider, Notch strength and sensitivity of sintered steels, in Euro PM2013 congress and exhibition (2013) [Google Scholar]
  15. M. Schneider, Density dependent approximation of stress-strain curves for elastic-plastic FEA-calculations, in Euro PM2019 congress and exhibition (2019) [Google Scholar]
  16. C.M. Sonsino, Fatigue design concepts for P/M parts and required material data: An overview, Metal Powder Industries Federation, Princeton, NJ (2003) [Google Scholar]
  17. M.Y. Bal’shin, Relation of mechanical properties of powder metals and their porosity and the ultimate properties of porous metal-ceramic materials, Doklady Akademii Nauk SSSR 67, 831–834 (1949) [Google Scholar]
  18. B.L.P. Engdahl, J. Tengzelius, Fatigue Behaviour of PM Steels − Material Aspects: PM into 1990’s, The Institute of Metals, London (1990) [Google Scholar]
  19. J. Campbell-Tremblay, C. Blais, G. L’Espérance et al., Characterization of the fatigue performance of P/M components produced with powders developed for improved machinability, in 2005 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2005 (2005), pp. 150–159 [Google Scholar]
  20. K.H. Kloos, A. Buch, D. Zankov, Pure geometrical size effect in fatigue tests with constant stress amplitude and in programme tests, Materialwissenschaft und Werkstofftechnik 12, 40–50 (1981) [Google Scholar]
  21. W. Weibull, A statistical theory of the strength of materials, Proceedings of the Royal Swedish Institute for Engineering Research, Generalstabens Litografiska Anstalts Förlag (1939) [Google Scholar]
  22. R. Kuguel, A relation between theoretical stress concentration factor and fatigue notch factor deduced from the concept of highly stressed volume, in Sixty-fourth Annual Meeting of the Society (ASTM), June 25-30, pp. 732–744, ASTM (1961) [Google Scholar]
  23. J. Baumgartner, K. Lipp, T. Bruder et al., Design methods for reliable fatigue assessment of PM components, Materialwissenschaft und Werkstofftechnik 42, 894–903 (2011) [Google Scholar]
  24. E. Siebel, M. Stieler, Ungleichförmige Spannungsverteilung bei schwingender Beanspruchung, VDI Zeitschrift 97, 121–126 (1955) [Google Scholar]
  25. D. Taylor, Geometrical effects in fatigue: a unifying theoretical model, Int. J. Fatigue 21, 413–420 (1999) [Google Scholar]
  26. H. Neuber, Über die Berücksichtigung der Spannungskonzentration bei Festigkeitsberechnungen, Konstruktion 20, 245–251 (1968) [Google Scholar]
  27. J. Baumgartner, H. Schmidt, E. Ince et al., Fatigue assessment of welded joints using stress averaging and critical distance approaches, Weld World 59, 731–742 (2015) [Google Scholar]
  28. W. Schütz, Über eine Beziehung zwischen der Lebensdauer bei konstanter und bei veränderlicher Beanspruchungsamplitude und ihre Anwendbarkeit auf die Bemessung von Flugzeugbauteilen, Zeitschrift für Flugwissenschaft 15, 407–419 (1967) [Google Scholar]
  29. D.S. Leininger, F.-C. Reissner, J. Baumgartner, New approaches for a reliable fatigue life prediction of powder metallurgy components using machine learning, Fatigue Fract. Eng. Mat. Struct. 46, 1190–1210 (2023) [Google Scholar]
  30. DIN Deutsches Institut für Normung e. V. (German Institute for Standardization), ISO 2740:2023 Sintered metal materials, excluding hardmetals −Tensile test pieces (2023) [Google Scholar]
  31. F.-C. Reissner, J. Baumgartner, E. Haberlick et al., Data-driven calculation of S-N curves for powder metallurgy components, in World PM 2022 Congress Proceedings, European Powder Metallurgy Association (EPMA) (2022) [Google Scholar]
  32. K. Burkamp, T. Hajeck, J. Baumgartner et al., FKM-Guideline − Analytical strength assessment of components made of sintered steels, Forschungskuratorium Maschinenbau (FKM) (2024) [Google Scholar]
  33. K. Burkamp, C. Broeckmann, P. Beiss, Statistical evaluation and scatter of fatigue strength data of sintered steels, in Euro PM2019-Modelling & Sintering of PM Steels (2019) [Google Scholar]
  34. C.M. Sonsino, J. Baumgartner, M. Breitenberger, Equivalent stress concepts for transforming of variable amplitude into constant amplitude loading and consequences for design and durability approval, Int. J. Fatigue 162, 106949 (2022) [Google Scholar]
  35. W. Eichlseder, Fatigue analysis by local stress concept based on finite element results, Comput. Struct. 80, 2109–2113 (2002) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.