EDP Sciences logo
Subscriber Authentication Point
Search
Menu
All issues Volume 123 / No 2 (2026) Metall. Res. Technol., 123 2 (2026) 202 References
Issue
Metall. Res. Technol.
Volume 123, Number 2, 2026
Special Issue on ‘Innovations in Iron and Steelmaking’, edited by Carlo Mapelli and Davide Mombelli
Article Number 202
Number of page(s) 9
DOI https://doi.org/10.1051/metal/2025127
Published online 21 January 2026
  1. K. Steneholm, M. Andersson, A. Tilliander et al., Removal of hydrogen, nitrogen and sulphur from tool steel during vacuum degassing, Ironmak. Steelmak. 40, 199 (2013) [Google Scholar]
  2. X. Li, X. Ma, J. Zhang et al., Review of hydrogen embrittlement in metals: hydrogen diffusion, hydrogen characterization, hydrogen embrittlement mechanism and prevention, Acta Metall. Sinica, 33, 759 (2020) [Google Scholar]
  3. V. Logar, D. Dovžan, I. Škrjanc, Mathematical modeling and experimental validation of an electric arc furnace, ISIJ Int. 51, 382 (2011) [Google Scholar]
  4. V. Logar, I. Škrjanc, Modeling and validation of the radiative heat transfer in an electric arc furnace, ISIJ Int. 52, 1225 (2012) [Google Scholar]
  5. V. Logar, I. Škrjanc, Development of an electric arc furnace simulator considering thermal, chemical and electrical aspects, ISIJ Int. 52, 1924 (2012) [Google Scholar]
  6. V. Logar, D. Dovžan, I. Škrjanc, Modeling and validation of an electric arc furnace part 1, heat and mass transfer, ISIJ Int. 52, 402 (2012) [Google Scholar]
  7. V. Logar, D. Dovžan, I. Škrjanc, Modeling and validation of an electric arc furnace part 2, thermo-chemistry, ISIJ Int. 52, 413 (2012) [Google Scholar]
  8. T. Meier, Modellierung und Simulation des Elektrolichtbogenofens, (Dissertation), Aachen: Faculty of Georessources and Materials Engineering, RWTH Aachen University, Germany, 2016 [Google Scholar]
  9. T. Hay, J.D. Hernandez, S. Roberts, Calculation of view factors in EAF process modeling, Steel Res. Int. 92, 2000341 (2021) [Google Scholar]
  10. T. Hay, A. Reimann, T. Echterhof, Improving the modeling of slag and steel bath chemistry in an electric arc furnace process model, Metall. Mater. Trans. B, 50, 2377 (2019) [Google Scholar]
  11. T. Hay, T. Echterhof, V.V. Visuri, Development of an electric arc furnace simulator based on a comprehensive dynamic process model, Processes 7, 852 (2019) [Google Scholar]
  12. T. Hay, Mathematische Modellierung des Elektrostahlverfahrens, (Dissertation), Aachen: Faculty of Georessources and Materials Engineering, RWTH Aachen University, Germany, 2021 [Google Scholar]
  13. A. Reinicke, T.N. Engbrecht, L. Schüttensack et al., Application of an artificial neural network for efficient computation of chemical activities within an EAF process model, Metals 14, 736 (2024) [Google Scholar]
  14. A. Reinicke, L. Schulte, T. Echterhof, Application of a neural network for calculating the off-gas generation within an EAF under modified operating conditions, Conf. Ser.: J. Phys. 3050, 012002 (2025) [Google Scholar]
  15. L. Schüttensack, A. Reinicke, T. Echterhof, Application of hydrogen operated burners in the electric arc furnace, IOP Conf. Ser.: Mater. Sci. Eng. 1309, 012011 (2024) [Google Scholar]
  16. C. Li, T.C. Brown, Carbon oxidation kinetics from evolved carbon oxide analysis during temperature-programmed oxidation, Carbon 39, 725 (2001) [Google Scholar]
  17. R.G. Blossey, R.D. Pehlke, Solubility of hydrogen in liquid Fe− Co− Ni alloys, Metall. Mater. Trans. B 2, 3157 (1971) [Google Scholar]
  18. A. Sieverts, W. Krumbhaar, E. Jurisch, The solubility of hydrogen in copper, iron and nickel, Z. Phys. Chem. 77, 591 (1911) [Google Scholar]
  19. F. Gehrmann, Einfluss der Nitride von V, Nb und Ti auf die Diffusion und Löslichkeit von Wasserstoff in Eisen, VDI-Verlag, 1994 [Google Scholar]
  20. T. Miki, Dilute solutions, in: Treatise on Process Metallurgy, Elsevier, vol. 557, 2014 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.