Rev. Met. Paris
Volume 106, Number 11, November 2009Coke Making
Non Destructive Testing
|Page(s)||518 - 528|
|Published online||05 November 2009|
Study of the scale behaviour in the finishing mill to improve the strip surface quality
The cracking behaviour of the oxide layer formed during hot rolling has been studied together with different combinations of process parameters in order to find their single influence on the surface quality and formation of oxide defects. Several trials have been performed on the CRM pilot line to study in detail the impact of strip reduction, strip temperature, entry scale thickness, roll degradation, lubrication, skin cooling, chemical composition and humidity on the scale behaviour. In general the degree of deformation, entry scale thickness and rolling temperatures are the more important parameters and the importance decreases in that order.
© La Revue de Métallurgie, 2009
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.