Modelling of viscosity of fluorine-free mold fluxes using neural network 201 Xiaoli Yuan, Lin Wang, Jianqiang Zhang, Oleg Ostrovski, Chen Zhang and Dexiang Cai Published online: 14 January 2019 DOI: https://doi.org/10.1051/metal/2018053 AbstractFull HTMLPDF (2.522 MB)References
Beneficiation of rejects slime of iron ore by means of sequential leaching 202 Santanu Sarkar and Supriya Sarkar Published online: 25 January 2019 DOI: https://doi.org/10.1051/metal/2018074 AbstractFull HTMLPDF (1.076 MB)References
Experimental in-situ metallographic investigations of industrial hydrocarbon processed fired heater tubes 203 Chidambaram Subramanian Published online: 25 January 2019 DOI: https://doi.org/10.1051/metal/2018062 AbstractFull HTMLPDF (4.430 MB)References
Concentrating Pt from a spent alumina carrier catalyst by a roast-leach process 204 Haigang Dong, Jiachun Zhao, Weifeng Tong, Hao Cui and Yuedong Wu Published online: 25 January 2019 DOI: https://doi.org/10.1051/metal/2018115 AbstractFull HTMLPDF (198.2 KB)References
Influence of continuous annealing soaking temperature on fish-scaling resistance of ultra-low carbon steel for porcelain enameling 205 Zaiwang Liu, Yonglin Kang and Yiding Li Published online: 25 January 2019 DOI: https://doi.org/10.1051/metal/2018058 AbstractFull HTMLPDF (1.519 MB)References
Effect of reoxidation on inclusions in steel during calcium treatment 206 Ming Li, Yang Liu and Lifeng Zhang Published online: 29 January 2019 DOI: https://doi.org/10.1051/metal/2018091 AbstractFull HTMLPDF (1.818 MB)References
A statistical study of inclusions in medium-grade non-oriented silicon steel 207 Wei Kong, Ying-feng Chen and Da-qiang Cang Published online: 04 February 2019 DOI: https://doi.org/10.1051/metal/2018113 AbstractFull HTMLPDF (1.836 MB)References
An environmentally friendly system for high efficient silver recovery from anode slime 208 Li Xiao, Peng Qian, Yang Yu, Peiwei Han, Yongliang Wang, Guoyan Fu, Zhi Sun and Shufeng Ye Published online: 14 February 2019 DOI: https://doi.org/10.1051/metal/2018070 AbstractFull HTMLPDF (1.937 MB)References
In situ observation on microstructure evolution of 22MnB5 in hot stamping process 209 Ling Kong and Yan Peng Published online: 01 February 2019 DOI: https://doi.org/10.1051/metal/2018082 AbstractFull HTMLPDF (2.778 MB)References
Chloride leaching of lanthanum and cerium from Indian red mud and metal separation studies 210 Abhilash, Pratima Meshram, Shivendra Sinha, Banshi Dhar Pandey, Vasudevan Krishna Kumari and Subrat Kar Published online: 06 February 2019 DOI: https://doi.org/10.1051/metal/2018090 AbstractFull HTMLPDF (1.119 MB)References
A sintering burden blending model based on one-step optimization method and high-temperature characteristics of iron ore 211 Shengli Wu, Xiaobo Zhai and Tiankai Song Published online: 15 February 2019 DOI: https://doi.org/10.1051/metal/2018080 AbstractFull HTMLPDF (576.4 KB)References
Aluminium grain refinement by Ti(C, N) nanoparticles additions: principles, advantages and drawbacks 212 Wanpeng Li, Jian Mao and Jie Feng Published online: 08 February 2019 DOI: https://doi.org/10.1051/metal/2018083 AbstractFull HTMLPDF (2.144 MB)References
A comprehensive study on synthesis behavior of nanostructured Al-Zn-Mg-Cu alloy powder with and without 3 wt.% Al2O3 particles during mechanical alloying 213 Mohsen Hajizamani, Ali Alizadeh and Mostafa Alizadeh Published online: 08 February 2019 DOI: https://doi.org/10.1051/metal/2018068 AbstractFull HTMLPDF (5.902 MB)References
The kinetics of vanadium extraction from spent hydroprocessing catalyst by leaching with sulfuric acid at atmospheric pressure 214 Hongjun Wang, Yali Feng, Haoran Li, Xiangyi Deng and Jinxing Kang Published online: 14 February 2019 DOI: https://doi.org/10.1051/metal/2018073 AbstractFull HTMLPDF (1.232 MB)References
Influence of water flow rate in mold on hooks and inclusions at the subsurface of ultra low carbon Al-killed continuous casting slabs 215 Lifeng Zhang, Xubin Zhang, Ying Ren and Wen Yang Published online: 08 February 2019 DOI: https://doi.org/10.1051/metal/2018065 AbstractFull HTMLPDF (1.577 MB)References
Hot workability of V-Ti microalloyed steel for forging 216 Ningbo Zhou, Fan Zhao, Meng Wu, Bo Jiang, Chaolei Zhang and Yazheng Liu Published online: 08 February 2019 DOI: https://doi.org/10.1051/metal/2018066 AbstractFull HTMLPDF (3.343 MB)References
Effect of basicity on cementitious activity of modified electric arc furnace steel slag 217 Xiang Lu, Wenbin Dai, Xiaoming Liu, Daqiang Cang and Liang Zhou Published online: 14 February 2019 DOI: https://doi.org/10.1051/metal/2018069 AbstractFull HTMLPDF (3.249 MB)References
Analysis of V and Cr with various valence states in FeO-SiO2-MnO-TiO2-VOx-MgO-CrOx system by XPS method 218 Deman Liu, Jiang Diao, Guang Wang and Bing Xie Published online: 14 February 2019 DOI: https://doi.org/10.1051/metal/2018075 AbstractFull HTMLPDF (4.552 MB)References
Effects of annealing treatment on mechanical properties of 8011 aluminum alloy after cryogenic rolling 219 Junjun Cui, Liqing Chen, Yanfei Li, Jiahua Liu and Jiaqi Xie Published online: 14 February 2019 DOI: https://doi.org/10.1051/metal/2018067 AbstractFull HTMLPDF (3.366 MB)References
Effect of microstructure and grain size on DWTT properties of 22 mm thick X80M hot rolled steel strip 220 Hao Wang, Yanping Bao, Yan Liu, Min Wang, Jiangang Wang and Cheng Su Published online: 14 February 2019 DOI: https://doi.org/10.1051/metal/2018137 AbstractFull HTMLPDF (2.768 MB)References
Effect of slag-metal composite cored wire feeding on the cleanness of Al-containing steel 221 Shuo Zhao, Yangyang Ge, Fuli Zhang, Jingcai Lyu, Tao Yan and Stephen Spooner Published online: 22 February 2019 DOI: https://doi.org/10.1051/metal/2018088 AbstractFull HTMLPDF (2.842 MB)References
Potential of a Nigerian biotite-rich kaolinite ore to industrial alumina by hydrometallurgical process 222 Alafara A. Baba, Mustapha A. Raji, Muhammed O. Muhammed, Aishat Y. Abdulkareem, Fausat T. Olasinde, Kuranga I. Ayinla, Folahan A. Adekola and Rafiu B. Bale Published online: 22 February 2019 DOI: https://doi.org/10.1051/metal/2018076 AbstractFull HTMLPDF (2.802 MB)References
Study on the behaviour of DS-Class inclusions in advanced bearing steel 223 Huajie Wu, Qiaoqi Li, Chongyi Wei and Zhe Wang Published online: 28 February 2019 DOI: https://doi.org/10.1051/metal/2018096 AbstractFull HTMLPDF (2.296 MB)References