Influence of clogging of a T-shaped desulfurization lance on the flow field in a hot metal ladle 301 Wenjun Ma, Haibo Li, Jun Zhang, Yang Cui and Liang Sun Published online: 08 March 2019 DOI: https://doi.org/10.1051/metal/2018092 Full HTMLPDF (2.232 MB)References
Effect of Widmanstätten η phase on tensile shear strength of resistance spot welding joints of A286 superalloy 302 Óscar Martín, Pilar De Tiedra and Manuel San-Juan Published online: 15 March 2019 DOI: https://doi.org/10.1051/metal/2018095 Full HTMLPDF (8.345 MB)References
Application of enhanced gravity technique for separation of iron phase from LD slag 303 Dilip Makhija, Rajenda Kumar Rath and Asim Kumar Mukherjee Published online: 15 March 2019 DOI: https://doi.org/10.1051/metal/2018094 Full HTMLPDF (1.028 MB)References
Influence of CGD structure on burden descending behavior in COREX shaft furnace 304 Xingsheng Zhang, Zongshu Zou and Zhiguo Luo Published online: 15 March 2019 DOI: https://doi.org/10.1051/metal/2018089 Full HTMLPDF (3.182 MB)References
Investigation and optimization of influencing parameters on the copper extraction from a low-grade oxide deposit by acid leaching 305 Mostafa Hosseinzadeh and Mohammad Raouf Hosseini Published online: 21 March 2019 DOI: https://doi.org/10.1051/metal/2018084 Full HTMLPDF (1.524 MB)References
Experimental and ab initio study of the influence of a compound modifier on carbidic ductile iron 306 Yang Penghui, Hanguang Fu, Lin Jian, Cheng Haiqiang and Lei Yongping Published online: 01 April 2019 DOI: https://doi.org/10.1051/metal/2018124 Full HTMLPDF (2.580 MB)References
A review on liquid level measurement techniques using mathematical models and field sensors in blast furnace 307 Ashish Agrawal, Anil Kumar Kothari, R.V. Ramna, Padmapal and Manish Kumar Singh Published online: 02 April 2019 DOI: https://doi.org/10.1051/metal/2018100 Full HTMLPDF (4.431 MB)References
Influence of alkaline additives on main minerals in Baotou rare earth tailings in the process of coal-based magnetizing roasting 308 Bo Zhang, Xiangxin Xue, He Yang, Xiaowei Huang and Gongjin Cheng Published online: 05 April 2019 DOI: https://doi.org/10.1051/metal/2018078 Full HTMLPDF (2.184 MB)References
Solvent extraction process for the selective recovery of copper and cobalt from carrollite leach solution 309 Bo Dong, Jian-hui Wu, Jun Wu, Xian-peng Zhang and Jing-jun Zhai Published online: 10 April 2019 DOI: https://doi.org/10.1051/metal/2018104 Full HTMLPDF (1.010 MB)References
Analysis of the off-corner subsurface cracks of continuous casting blooms under the influence of soft reduction and controllable approaches by a chamfer technology 310 Nanfu Zong, Hui Zhang, Yang Liu and Zhifang Lu Published online: 10 April 2019 DOI: https://doi.org/10.1051/metal/2018102 Full HTMLPDF (6.418 MB)References
A comparison of corrosion behaviors of additive manufacturing cobalt-chromium alloy in different solutions 311 Liyan Ma and Jia Niu Published online: 10 April 2019 DOI: https://doi.org/10.1051/metal/2019005 Full HTMLPDF (659.8 KB)References
Microstructure and properties of pure aluminum prepared by spark plasma sintering 312 Wen Zeng, Weicai Qin, Cheng Gu, Hao Sun, Yilong Ma and Xianlong Cao Published online: 10 April 2019 DOI: https://doi.org/10.1051/metal/2018105 Full HTMLPDF (2.438 MB)References
The process of vanadium migration and silicon extraction by alkaline leaching from high silicon stone coal under reduction conditions 313 Hao Wu, Yali Feng, Heng Zhang and Haoran Li Published online: 10 April 2019 DOI: https://doi.org/10.1051/metal/2018101 Full HTMLPDF (1.644 MB)References
Investigation on the uneven distribution of different types of ores in the hopper and stock surface during the charging process of blast furnace based on discrete element method 314 Wenxuan Xu, Shusen Cheng, Qun Niu, Wei Hu and Jiawen Bang Published online: 10 April 2019 DOI: https://doi.org/10.1051/metal/2018099 Full HTMLPDF (2.678 MB)References
Investigation of a granule structure that focused on reducing NOx emissions in sintering process 315 Junmao Qie, Chunxia Zhang, Haifeng Wang, Yuhua Guo and Shengli Wu Published online: 17 April 2019 DOI: https://doi.org/10.1051/metal/2018127 Full HTMLPDF (2.278 MB)References
Free Access In memoriam: Jean-Alex Michard 316 Robert Alberny, Gérard Bernard, Jean-Pierre Birat, Pierre Gugliermina, Rémi Nicolle and Jean-Marc Steiler Published online: 17 April 2019 DOI: https://doi.org/10.1051/metal/2018103 Full HTMLPDF (1.765 MB)References
Effect of MnO on the fusing temperature and the viscosity of high titanium slag 317 Shiju Zhang, Wenhui Ma, Ping Zhang, Jianhua Wen and Songli Liu Published online: 17 April 2019 DOI: https://doi.org/10.1051/metal/2018121 Full HTMLPDF (1.247 MB)References
Preparation of high quality FeV65N by carbonitrothermic reduction of V2O5 and Fe2O3 318 Yue-Dong Wu, Guo-Hua Zhang and Kuo-Chih Chou Published online: 17 April 2019 DOI: https://doi.org/10.1051/metal/2018109 Full HTMLPDF (1.984 MB)References
Synergistic effect of organic acid on the dissolution of mixed nickel-cobalt hydroxide precipitate in sulphuric acid solution 319 Sait Kursunoglu Published online: 17 April 2019 DOI: https://doi.org/10.1051/metal/2018107 Full HTMLPDF (1.662 MB)References
Leaching of galena by regenerated ferric ion (Fe3+) via electro-oxidation 320 Fan Yang, Ming-ming Wang, Zhan-fang Cao, Jing Wang, Pei Chen, Xin Wen, Shuai Wang, Guang-yi Liu and Hong Zhong Published online: 17 April 2019 DOI: https://doi.org/10.1051/metal/2018108 Full HTMLPDF (757.3 KB)References
Dissolution mechanism of various elements from steelmaking slag into citric acid solution 321 Ningning Lv, Chang Su, Hui Kong, Jinxing Yang, Weiming Liu and Haichuan Wang Published online: 26 April 2019 DOI: https://doi.org/10.1051/metal/2018125 Full HTMLPDF (2.987 MB)References
Precipitation and growth of MnS inclusion in an austenitic hot-work die steel during ESR solidification process 322 Yongfeng Qi, Jing Li, Chengbin Shi, Hao Wang and Dingli Zheng Published online: 26 April 2019 DOI: https://doi.org/10.1051/metal/2018114 Full HTMLPDF (5.022 MB)References
Interfacial characterization with wettability, microstructure and interfacial thermodynamics for Ti–Al/VN system 323 Xuyang Liu, Xuewei Lv, Ning Hu and Jingqi Liu Published online: 26 April 2019 DOI: https://doi.org/10.1051/metal/2018111 Full HTMLPDF (2.075 MB)References
Enrichment of a Nigerian chromite ore for metallurgical application by dense medium flotation and magnetic separation 324 Kuranga Ibrahim Ayinla, Alafara Abdullahi Baba, Bankim Chandra Tripathy, Malay Kumar Ghosh, Rajan Kumar Dwari and Subrat Kumar Padhy Published online: 26 April 2019 DOI: https://doi.org/10.1051/metal/2018097 Full HTMLPDF (1.333 MB)References