Issue |
Metall. Res. Technol.
Volume 116, Number 3, 2019
|
|
---|---|---|
Article Number | 301 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/metal/2018092 | |
Published online | 08 March 2019 |
Regular Article
Influence of clogging of a T-shaped desulfurization lance on the flow field in a hot metal ladle
1
Shougang Group Co., LTD Research Institute of Technology, Room 1107, Shougang Research Institute of Technology,
No. 69, Yangzhuang Road, Shijingshan District,
100043
Beijing, PR China
2
Beijing Shougang co., ltd, Room 606, Yang DianZi Town Riverside Village,
064404
Qian’an, PR China
* e-mail: mawenjun2929@163.com
Received:
12
April
2018
Accepted:
28
August
2018
Lance injected desulphurization become ineffective when injection ports become obstructed. In this work, the difference of the flow fields between single and double hole injection was investigated by numerical simulations. When one of the openings in a T-shaped injection lance is blocked, a dead zone occurs in the ladle over approximately 1/4th of the volume, and there is not an active flow field on the surface of clogging side. To decrease clogging, industrial experiments examining different diameter lances were carried out. The results showed that clogging can be reduced by increasing the injection pressure and optimizing the injection hole diameter to be approximately 10 times the particle size of desulphurizer.
Key words: injection desulfurization / clogging / kinetic model / numerical simulation / flow field
© EDP Sciences, 2019
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.