Metall. Res. Technol.
Volume 116, Number 4, 2019
|Number of page(s)||12|
|Published online||21 May 2019|
The analytic study on the heavy steel plate snake rolling with the different roll diameters
School of Mechanical Engineering, Taiyuan University of Science and Technology,
030024, PR China
2 Coordinative Innovation Center of Taiyuan Heavy Machinery Equipment, Taiyuan University of Science and Technology, Taiyuan 030024, PR China
* e-mail: email@example.com
Accepted: 22 October 2018
The deformation in the inner region along the thickness of the heavy steel plate can be improved by snake rolling method. Then the microstructure and property will be refined and the crack in the inner region may be avoided. So the in-depth research on snake rolling method mechanics parameter modeling should be conducted to guide production. The rolling deformation zone will be divided into back slip zone, cross shear zone, front slip zone and reverse deflection zone according to the direction of the friction during the snake rolling process. The four zones may not exist at the same time. The boundary conditions of existence of the back slip zone, cross shear zone and front slip zone were established by calculating the position of neutral point by a special method. The calculating models which were used to calculate the snake rolling mechanical parameters including the rolling force and rolling torque were setup. The calculated models of unit compressive pressure in the four zones were setup by the slab method, and at this basis, the accurate calculating models of the rolling force and rolling torque were setup according to the composition of the rolling deformation zone and the boundary condition. The mechanical parameters were calculated by the analytic method and the numerical method, and the relative deviation is less than 5% which can satisfy the industrial requirement. The present analytical model can predict the characteristics during snake rolling easily and quickly and it is also suitable for online control applications.
Key words: snake rolling / deformation zone / slab method / mechanical parameters / roll diameter ratio
© EDP Sciences, 2019
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.