| Issue |
Metall. Res. Technol.
Volume 116, Number 5, 2019
Inclusion cleanliness in the metallic alloys
|
|
|---|---|---|
| Article Number | 507 | |
| Number of page(s) | 2 | |
| DOI | https://doi.org/10.1051/metal/2019026 | |
| Published online | 13 August 2019 | |
Editorial
Inclusion cleanliness in metallic alloys
1
Université de Lorraine, CNRS, IJL, Laboratory of Excellence DAMAS,
54000
Nancy, France
2
ArcelorMittal Global R&D Maizières,
BP30320,
57283
Maizières-les-Metz Cedex, France
3
Mines Saint-Étienne, Univ Lyon, CNRS, UMR 5307 LGF, Centre SPIN,
42023
Saint-Étienne, France
* e-mail: jean-pierre.bellot@univ-lorraine.fr
Received:
9
May
2019
Accepted:
9
May
2019
The inclusion cleanliness remains an issue of great concern in liquid metal processing which has been addressed in a full session of the last Matériaux Conference held in November 2018 in Strasbourg, France. A special issue of the Metallurgical Research & Technology journal gathers most of the papers of this session which are divided into two sub-sections: on the one hand the analysis and characterization techniques of the inclusions are addressed and on the other hand the modelling methods to simulate the behavior of single particle or a population of inclusions are discussed.
© J.-P. Bellot et al., published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.