Revue de Métallurgie

Scrap recycling and production of high quality steel grades in Europe p. 1377

C. Marique

Published online: 18 January 2017

DOI: https://doi.org/10.1051/metal/199693111377

• Abstract
• PDF (11.5 MB)

Results of the metallurgical model for the BOF blowing process control at Sidmar p. 1387

L. Peeters, C. Vercruyssen, E. Van der Eeken, F. Haers and P. Wollants

Published online: 18 January 2017

DOI: https://doi.org/10.1051/metal/199693111387

• Abstract
• PDF (10.0 MB)

The use of photogrammetry to measure refractory wear in hot vessels p. 1397

B.C. Welbourn, P. Bell, R.P. Mark and H.J. Riedel

Published online: 18 January 2017

DOI: https://doi.org/10.1051/metal/199693111397

• Abstract
• PDF (8.99 MB)

Determination of strand surface temperature and heat transfer during continuous casting p. 1403

B. Barber, B. Patrick, P. Watson, R. York, F. Kitching, H. Sha, K. Kraushaar and K. H. Spitzer

Published online: 18 January 2017

DOI: https://doi.org/10.1051/metal/199693111403

• Abstract
• PDF (10.9 MB)

Automatic width control system using interstand tension in hot strip finishing mill p. 1413

Y. Hoshi, M. Kitahama, M. Okada, H. Yoneda, H. Shiomi and Y. Fujii

Published online: 18 January 2017

DOI: https://doi.org/10.1051/metal/199693111413

• Abstract
• PDF (8.80 MB)

Development of the production of high thickness-uniformity sheet in the new tandem cold strip mill at Kashima Steel Works p. 1421

K. Jojima, S. Iyama, S. Kamada, M. Eto, R. Hamada, T. Ooi and Y. Washikita

Published online: 18 January 2017

DOI: https://doi.org/10.1051/metal/199693111421

• Abstract
• PDF (10.21 MB)

Development of a fast annealing pickling technology for cold rolled stainless steel strips p. 1431

S. Kiya, T. Kojima, Y. Hyugaji and Y. Hayashi

Published online: 18 January 2017

DOI: https://doi.org/10.1051/metal/199693111431

• Abstract
• PDF (7.64 MB)

Application du contrôle vectoriel de flux aux ponts d’enfournement de 380 t de Sollac Dunkerque p. 1437

J.P. Duwelz, R. Charlet and R. Ginet

Published online: 18 January 2017

DOI: https://doi.org/10.1051/metal/199693111437

• Abstract
• PDF (5.41 MB)

Optimisation et maîtrise des processus par la méthode MIP p. 1443

R. Galva and P. Savarit

Published online: 18 January 2017

DOI: https://doi.org/10.1051/metal/199693111443

• Abstract
• PDF (18.2 MB)

Technologies de protection de l’environnement. - Apports du V^e programme de recherche CECA 1984-1994 p. 1459

C. Josis and F. Klein

Published online: 18 January 2017

DOI: https://doi.org/10.1051/metal/199693111459

• Abstract
• PDF (14.5 MB)

L’activité sidérurgique et les risques de pollution des sols p. 1467

J. Antoine and R. Pazdej

Published online: 18 January 2017

DOI: https://doi.org/10.1051/metal/199693111467

• Abstract
• PDF (11.97 MB)