Revue de Métallurgie

VAIQ-Strip, un nouveau système de contrôle de qualité pour les bandes laminées à chaud p. 883

J. Andorfer, D. Auzinger, M. Hirsch, G. Hubmer and R. Pichler

Published online: 17 January 2017

DOI: https://doi.org/10.1051/metal/199895070883

• Abstract
• PDF (39.35 MB)

Définition des conditions de laminage à chaud d’aciers inoxydables dans le futur train ébaucheur d’Ugine-Savoie p. 893

G. Mathern, X. Cholin, M. Cordel, H. Sassoulas and A. Le Yaouanc

Published online: 17 January 2017

DOI: https://doi.org/10.1051/metal/199895070893

• Abstract
• PDF (27.72 MB)

Automatic rolling technology for a fully continuous cold tandem mill p. 901

Y. Nakagawa, Y. Kadoya, T. Ooi, S. Kamada, N. Takada and T. Yanagita

Published online: 17 January 2017

DOI: https://doi.org/10.1051/metal/199895070901

• Abstract
• PDF (33.09 MB)

Improvement of the accuracy in thickness during flying gauge change in tandem cold mills p. 911

H. Kijima, K. Kenmochi, I. Yarita, Y. Sunamori, A. Fukuhara and M. Miyahara

Published online: 17 January 2017

DOI: https://doi.org/10.1051/metal/199895070911

• Abstract
• PDF (24.36 MB)

Le laminoir pilote à froid de l’Irsid p. 919

P. Masson, I. Santi, B. Fournel and G. Hauret

Published online: 17 January 2017

DOI: https://doi.org/10.1051/metal/199895070919

• Abstract
• PDF (29.36 MB)

Application des lois de comportement élasto-plastiques discrétisées au skin-pass et au laminage p. 929

C. Counhaye and L. Chefneux

Published online: 17 January 2017

DOI: https://doi.org/10.1051/metal/199895070929

• Abstract
• PDF (29.14 MB)

Évolution récente du skin-pass des tôles minces p. 939

M.L. Busch-Milosevic, H. Biausser, A. Fouratier, B. Fournel and M. Grumbach

Published online: 17 January 2017

DOI: https://doi.org/10.1051/metal/199895070939

• Abstract
• PDF (49.73 MB)

Optimization of the mechanical profile of rolls in continuous annealing lines p. 955

A. Elias and F. Onno

Published online: 17 January 2017

DOI: https://doi.org/10.1051/metal/199895070955

• Abstract
• PDF (20.97 MB)

A new air knife system with adjustable lip gaps for hot dip galvanizing p. 961

H. Iwamoto, A. Yamauchi, Y. Hasegawa and T. Isono

Published online: 17 January 2017

DOI: https://doi.org/10.1051/metal/199895070961

• Abstract
• PDF (26.03 MB)

Application industrielle d’un cycle de recuit carré en galvannealing p. 969

Y. Hardy, P. Simon, S. Wilmotte, M. Béguin and M. Dachelet

Published online: 17 January 2017

DOI: https://doi.org/10.1051/metal/199895070969

• Abstract
• PDF (47.20 MB)

Ultra-low carbon steel for DWI cans production : the best way for ultralight p. 983

B. Backelandt and G. Mangin

Published online: 17 January 2017

DOI: https://doi.org/10.1051/metal/199895070983

• Abstract
• PDF (21.10 MB)

A quarter century of steel cord manufacture. State of the art technology and critical topics for the future p. 989

E. Grethen

Published online: 17 January 2017

DOI: https://doi.org/10.1051/metal/199895070989

• Abstract
• PDF (37.81 MB)