Recycling of steel and recycling of zinc: a steel producer's viewpoint p. 721 J.P. Birat, M. Schneider and B. Gros Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060721 AbstractPDF (44.1 MB)
Les usines intégrées compactes : des solutions pour la sidérurgie du XXIe siècle p. 731 J. Eggerth, L. Gould and K. Gruber Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060731 AbstractPDF (68.19 MB)
Chauffage en tri-gaz des fours de la cokerie de Dunkerque p. 743 J.B. Leroy and F. Bruckert Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060743 AbstractPDF (16.37 MB)
Comment estimer l’âge d’un creuset de haut-fourneau ? p. 749 B. Billon, G. Bruckert and J.L. Lebonvallet Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060749 AbstractPDF (19.43 MB)
Melting and mixing processes in a 185-t operating ladle with one to three porous plugs p. 755 H. Lachmund, N. Bannenberg and T. Scherrmann Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060755 AbstractPDF (34.2 MB)
Continuous casting developments at British Steel p. 765 P.N. Hewitt, A. Robson, A.S. Normanton, N.S. Hunter, A. Scholes and D. Stewart Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060765 AbstractPDF (47.8 MB)
Ébavurage des brames : contrôle qualité par vidéo, contrôle du fonctionnement par analyse des signaux p. 777 G. Séréno, J.L. Salon, J.P. Laigneau, J.C. Gangnery and A. Serkis Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060777 AbstractPDF (27.66 MB)
Brûleurs « Solfos » polycombustibles à simple et double flux d’air et de type radiant p. 785 A. Usaï and S. Silvestrini Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060785 AbstractPDF (14.68 MB)
On-line analysis of the work roll surface deterioration in a hot strip mill p. 789 H. Uijtdebroeks, R. Franssen, G. Franssen and A. Van Schooten Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060789 AbstractPDF (62.3 MB)
Développement d’un nouveau système de mesure de la qualité du bobinage au train à bandes p. 801 E. Tonnon, C. Moretto, R. François, M. De Conti and RM. Wadoux Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060801 AbstractPDF (31.59 MB)
De la mesure de laboratoire à la mesure en ligne et en continu des propriétés radiatives des tôles p. 809 P.J. Krauth and R. Fatrez Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060809 AbstractPDF (62.79 MB)
Sensor system for continuous monitoring of the zinc coating weight on hot dip galvanized wires p. 823 J.C. Baumert Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060823 AbstractPDF (42.4 MB)
Les aciers pour moules d’injection plastique : une évolution permanente p. 833 F. Chenou and L. Cadiou Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199895060833 AbstractPDF (44.95 MB)