Revue de Métallurgie

Recent developments and respectives in the steel industry at the beginning of the 21st century p. 871

G. Dollé

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097070871

• Abstract
• PDF (34.11 MB)

The technical challenges in iron and steelmaking at the dawn of the 21st Century p. 879

G. Bernard

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097070879

• Abstract
• PDF (33.78 MB)

Speedy switchover of operation from Tobata No. 1 to No. 4 blast furnace at Yawata Works p. 887

Y. Kurita, Y. Morizane, S. Noguchi, K. Kurihara, I. Ogata and Y. Terada

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097070887

• Abstract
• PDF (30.76 MB)

A new steelmaking concept at Saldanha p. 897

Dr. Horst Kappes

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097070897

• Abstract
• PDF (39.89 MB)

Metallurgical aspects for the production of formable thin hot strips p. 905

A. De Paepe, J.C. Herman, P. Hekker and E.F.M. Jansen

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097070905

• Abstract
• PDF (33.44 MB)

Les solutions de VAI pour le laminage des bandes à chaud ultra-minces p. 913

A. Seilinger and A. Schweighofer

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097070913

• Abstract
• PDF (29.93 MB)

Planéité des tôles de grand format et de faible épaisseur : bilan d’un nouveau procédé de trempe p. 921

J. Michotte, M. Mouyard and B. Noël

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097070921

• Abstract
• PDF (38.36 MB)

Technologies of the highest speed rolling in the world at a cold tandem mill p. 931

T. Saito, K. Hamagami, T. Kaneko, K. Kawashima, K. Takezawa and T. Chonan

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097070931

• Abstract
• PDF (32.74 MB)

Modal analysis and vibratory modelling for an industrial cold rolling mill stand p. 941

B. Petit, P. Do Thong, P. Lorong and G. Coffignal

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097070941

• Abstract
• PDF (45.02 MB)

Un nouveau type de laminoir à froid réversible à Heartland Steel p. 953

R. Héquet

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097070953

• Abstract
• PDF (47.53 MB)

Intégration du transfert de rugosité à un modèle de laminage à froid p. 961

C. Collette, C. Counhaye and J.P. Ponthot

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097070961

• Abstract
• PDF (33.78 MB)

“Jet Vapor Deposition”, a novel vacuum coating technique with superior properties p. 971

B. Schmitz, R. Colin and M. Economopoulos

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097070971

• Abstract
• PDF (33.52 MB)