Revue de Métallurgie

Dead-man temperature estimation based on the acoustic CT method p. 721

T .Okada, M. Ichida, H. Yamaji, K. Kunitomo, M. Inoue, I. Yamada and K. Yamane

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097060721

• Abstract
• PDF (34.5 MB)

Recent improvement of BOF refining at Kwangyang Works p. 729

J.M. Park and C.S. Ha

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097060729

• Abstract
• PDF (25.9 MB)

Rapid analysis of steelmaking slag by energy-dispersive X-ray fluorescence spectrometry p. 737

H. Nagashima, S. Sato, M. Okano, T. Mochizuki and Y. Yoshioka

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097060737

• Abstract
• PDF (29.1 MB)

The Danieli Danarc™ furnace at ABS p. 745

A. Michielan, G. Lavaroni and A. Fior

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097060745

• Abstract
• PDF (28.9 MB)

La modernisation de l’automatisme de la machine de coulée continue de brames de Dansteel p. 753

B. Lodin, T. Kløvborg-Laustsen, A. Kjaer, J. Weiss, H. Preissl and P. Juza

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097060753

• Abstract
• PDF (53.7 MB)

An enhanced eddy current level control system in continuous casting p. 763

D. Clymans

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097060763

• Abstract
• PDF (20.1 MB)

Applications of an immersion-type, optical fiber pyrometer p. 769

P. Clymans

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097060769

• Abstract
• PDF (20.8 MB)

Methodology of steel cleanliness assessment p. 775

M. Burty, C. Louis, P. Dunand, P. Osmont, F. Ruby-Meyer, M. Nadif, F. Penet, T. Isono, E. Takeuchi and T. Toh

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097060775

• Abstract
• PDF (27.4 MB)

The detection and assessment of surface characteristics of hot strip by an on-line inspection procedure p. 783

P. Ceracki, H.J. Reizig, U. Rudolphi and F. Lücking

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097060783

• Abstract
• PDF (29.7 MB)

Simulation dynamique des structures de contrôle de l’épaisseur en laminage à froid p. 789

F. Leroy, C. Counhaye, P. Aubry, L. Chefneux and M. Remy

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097060789

• Abstract
• PDF (38.3 MB)

DSR technology to improve strip flatness on a steel tandem cold mill p. 799

B. Becker, N. Legrand, D. Vallet and G. Fellus

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097060799

• Abstract
• PDF (54.2 MB)

Prévision de l’orientation du plan d’amorçage en fatigue à l’aide d’un critère multiaxial de fatigue de type plan critique p. 815

B. Weber, A. Carmet and J.L. Robert

Published online: 13 January 2017

DOI: https://doi.org/10.1051/metal/200097060815

• Abstract
• PDF (43.3 MB)