Metallurgical Research & Technology

Liquid structure evolution of molten iron in blast furnace hearth 601

Yong Deng, Kexin Jiao and Jianliang Zhang

Published online: 26 August 2019

DOI: https://doi.org/10.1051/metal/2019035

Effect of the simultaneous Ti and W addition on the microstructure and wear behavior of a high chromium white cast iron 602

Francisco Vapeani Guerra, Arnoldo Bedolla-Jacuinde, Jorge Zuno-Silva, Ignacio Mejia, Edgar Cardoso-Legorreta and Alberto Arenas-Flores

Published online: 26 August 2019

DOI: https://doi.org/10.1051/metal/2019031

Preliminary investigations on hydrometallurgical treatment of spent Li-ion batteries 603

Ewa Rudnik and Joanna Knapczyk-Korczak

Published online: 26 August 2019

DOI: https://doi.org/10.1051/metal/2019008

Microstructure and texture evolution of medium temperature grain-oriented silicon steel produced by industrialization 604

Lifeng Fan, Liying Jia, Rong Zhu and Jianzhong He

Published online: 26 August 2019

DOI: https://doi.org/10.1051/metal/2019030

Dynamic recrystallization kinetics and microstructure evolution of 7055 aluminum alloy during hot compression 605

Tao Zhang, Huapu Sha, Lei Li, Shihong Lu and Hai Gong

Published online: 28 August 2019

DOI: https://doi.org/10.1051/metal/2019034

Viscosities in PbO − ZnO − “Fe_xO” − SiO₂–CaO system for lead and zinc smelting slags 606

Kun OuYang, Zhi-he Dou, Ting-an Zhang, Yan Liu and Li-ping Niu

Published online: 28 August 2019

DOI: https://doi.org/10.1051/metal/2019038

Behavior of porosity in billet during rolling process of rail 607

Rong Cheng, Jiongming Zhang, Liangjin Zhang and Haitao Ma

Published online: 28 August 2019

DOI: https://doi.org/10.1051/metal/2019029

Application of a chamfer slab technology to reduce internal cracks of continuous casting bloom during soft reduction process 608

Nanfu Zong, Hui Zhang, Minglin Wang and Zhifang Lu

Published online: 29 August 2019

DOI: https://doi.org/10.1051/metal/2018112

Effects of alkali metal on solution loss and coke degradation 609

Dongsheng Yu, Rui Guo, Yinghua Liang, Lianji Liu and Peng Chen

Published online: 30 August 2019

DOI: https://doi.org/10.1051/metal/2019041

Influence of thermal conductivity of ceramic materials on heating rate/coking time and coke quality in cokemaking 610

Hari Prakash Tiwari, Aman Kumar, Vijay Kumar Tiwary, Pratik Swarup Dash and Atanu Ranjan Pal

Published online: 30 August 2019

DOI: https://doi.org/10.1051/metal/2018086

Utilization of low-grade BHQ iron ore by reduction roasting followed by magnetic separation for the production of magnetite-based pellet feed 611

Sachida Nanda Sahu, Karamjith Sharma, Santosh Deb Barma, Prachiprava Pradhan, Bijaya K. Nayak and Surendra K. Biswal

Published online: 30 August 2019

DOI: https://doi.org/10.1051/metal/2019039

Thermodynamics and transient behavior of the inclusion in Si deoxidized stainless steel for high-grade plate 612

Wanlin Wang, Liwen Xue, Tongsheng Zhang, Lejun Zhou, Daoyuan Huang, Weiguang Tian and Jialin Xu

Published online: 06 September 2019

DOI: https://doi.org/10.1051/metal/2019042

Hot forming with a nonuniform temperature field using die partition cooling 613

Cai-yi Liu, Yan Peng, Ling Kong, Lu-han Hao and Ren Zhai

Published online: 06 September 2019

DOI: https://doi.org/10.1051/metal/2019044

Influence of material parameters on 2D-martensitic transformation based on the phase-field finite-element method 614

Li Chang, Gao Jingxiang, Zhang Dacheng, Chen Zhengwei and Han Xing

Published online: 06 September 2019

DOI: https://doi.org/10.1051/metal/2019036

Open Access

An original unified approach for the description of phase transformations in steel during cooling: first application to binary Fe–C 615

Olivier Bouaziz

Published online: 17 September 2019

DOI: https://doi.org/10.1051/metal/2019037

Effect of heat input on microstructure and properties of dissimilar laser welded joints between TWIP and TRIP steels 616

Qian Sun, Hong-Shuang Di, Xiao-Nan Wang, Xia-Ming Chen, Xiao-Kang Nie, Dong-Liang Chen and Jian-Ping Li

Published online: 17 September 2019

DOI: https://doi.org/10.1051/metal/2019043

Assessment of an Eulerian multi-fluid VOF model for simulation of multiphase flow in an industrial Ruhrstahl–Heraeus degasser 617

Gujun Chen, Qiangqiang Wang and Shengping He

Published online: 20 September 2019

DOI: https://doi.org/10.1051/metal/2019049

Zinc diffusion induced precipitation of σ-phase in austenitic stainless steel 618

Nega Setargew and Daniel J. Parker

Published online: 20 September 2019

DOI: https://doi.org/10.1051/metal/2019040

Inclusions evolution during the LF refining process of 439 ultra-pure ferritic stainless steel 619

Xingrun Chen, Guoguang Cheng, Yuyang Hou and Jingyu Li

Published online: 23 September 2019

DOI: https://doi.org/10.1051/metal/2019048

Metallurgical characteristics of refining slag used for high manganese steel 620

Huixiang Yu, Dexin Yang, Muming Li and Ming Pan

Published online: 23 September 2019

DOI: https://doi.org/10.1051/metal/2019050

High-efficiency continuous casting of GCr15 bearing steel bloom based on cooperative control technique of complex electromagnetic stirring and soft reduction 621

Hanghang An, Yan Ping Bao, Min Wang, Quan Yang, Xiang Hong Wang and Yan Yin Dang

Published online: 08 October 2019

DOI: https://doi.org/10.1051/metal/2019051

The relationship between the deformation and the indentation size effect (ISE) 622

Jozef Petrík, Peter Blaško, Mária Mihaliková, Andrea Vasilňáková and Vojtech Mikloš

Published online: 11 October 2019

DOI: https://doi.org/10.1051/metal/2019022

Effect of composition and morphology of non-metallic inclusions on fracture toughness in as-cast AHSS 623

Zhanfang Wu, Zhenyu Liu, Shengtao Qiu and Xiangyang Li

Published online: 11 October 2019

DOI: https://doi.org/10.1051/metal/2019052

Effect of mechanical activation on the structure of pulverized coal and iron ore powder 624

Rufei Wei, Dongwen Xiang, Hongming Long, Jiaxin Li and Qingmin Meng

Published online: 24 October 2019

DOI: https://doi.org/10.1051/metal/2019045

Real-time indices focus on slag flowability and coke strength for blast furnace operation 625

Jia-Shyan Shiau

Published online: 28 October 2019

DOI: https://doi.org/10.1051/metal/2019054

Research on the oxygen content in 304L stainless steel during VOD-LF-CC process based on IMCT 626

Xingrun Chen, Guoguang Cheng, Yao Li and Yuyang Hou

Published online: 11 November 2019

DOI: https://doi.org/10.1051/metal/2019057

Effect of SiO₂ containing slag for electroslag remelting on inclusion modification of 42CrMo steel 627

Yu Liu, Zhao Zhang, Guangqiang Li, Yang Wu, Xijie Wang and Baokuan Li

Published online: 21 November 2019

DOI: https://doi.org/10.1051/metal/2019063

Microstructure and thermodynamic analysis of nanostructured Cu-13.2%Al-4%Ni ternary system synthesized by mechanical alloying 628

Rouzbeh Mayahi, Ali Shokuhfar and Mohammad Reza Vaezi

Published online: 21 November 2019

DOI: https://doi.org/10.1051/metal/2019056

Effect of vibration on the formation of second phase particles in cast-rolling strips 629

Zhiwang Zhu, Menglong Xing, Minghan Sun, Jieping Wei and Fengshan Du

Published online: 21 November 2019

DOI: https://doi.org/10.1051/metal/2019046

Effect of B₂O₃ on the carbothermal reduction of vanadium titanium magnetite 630

Xing Xiangdong, Wang Sha, Pang Zhuogang and Zhang Qiuli

Published online: 22 November 2019

DOI: https://doi.org/10.1051/metal/2019053

Effect of hybrid reinforcement at stirred zone of dissimilar aluminium alloys during friction stir welding 631

R. Ashok kumar, G.R. Raghav, K.J. Nagarajan, Sathish Rengarajan, P. Suganthi and V. Vignesh

Published online: 22 November 2019

DOI: https://doi.org/10.1051/metal/2019062

Study on microstructure and texture of a new-type low Si high Mn non-oriented silicon steel 50W250 632

Lifeng Fan, Sai Li, Lijun Xiao, Guangbo Tang, Liang Bai and Jiao Huang

Published online: 26 November 2019

DOI: https://doi.org/10.1051/metal/2019059

Transverse heterogeneity of interfacial bonding behavior during roll bonding of Cu/Al bimetallic plates 633

Xiang Yu Gao, Tao Wang, Zhong Kai Ren, Jian Chao Han, Dong Ping He and Sha Li

Published online: 26 November 2019

DOI: https://doi.org/10.1051/metal/2019058

Open Access

A contribution to laser cladding of Ti-6Al-4V titanium alloy 634

Samar Reda Al-Sayed Ali, Abdel Hamid Ahmed Hussein, Adel Nofal, Salah Ibrahim Hassab Elnaby and Haytham Elgazzar

Published online: 26 November 2019

DOI: https://doi.org/10.1051/metal/2019060

Thermal conductivity of titanium slags 635

Juhani Heimo, Ari Jokilaakso, Marko Kekkonen, Merete Tangstad and Anne Støre

Published online: 27 November 2019

DOI: https://doi.org/10.1051/metal/2019064

Large eddy simulation modelling of asymmetrical flow structures in a vertical-bending continuous caster 636

Peng Zhao, Yinhe Lin, Bin Yang, Kegao Liu, Jingrui Zhao and Kai Tang

Published online: 04 December 2019

DOI: https://doi.org/10.1051/metal/2019065

A novel hot-tamping process for producing an improved quality of coke 637

Keliang Pang, Dongjie Liu, Ji Wu, Cai Liang, Jiliang Ma and Qingwen Wei

Published online: 04 December 2019

DOI: https://doi.org/10.1051/metal/2019061

Effects of basicity and CaF₂ on the viscosity of CaF₂–CaO–SiO₂ slag for electroslag remelting process 638

Yigui Lao, Yunming Gao, Fangjie Deng, Qiang Wang and Guangqiang Li

Published online: 10 December 2019

DOI: https://doi.org/10.1051/metal/2019066

Effect of manganese pre-partitioning process on the microstructure and mechanical properties of low carbon dual phase steel 639

Yonggang Deng, Hongshuang Di and Raja Devesh Kumar Misra

Published online: 12 December 2019

DOI: https://doi.org/10.1051/metal/2019068

Metallurgical Research & Technology

Volume 116 / No 6 (2019)

Liquid structure evolution of molten iron in blast furnace hearth 601

Effect of the simultaneous Ti and W addition on the microstructure and wear behavior of a high chromium white cast iron 602

Preliminary investigations on hydrometallurgical treatment of spent Li-ion batteries 603

Microstructure and texture evolution of medium temperature grain-oriented silicon steel produced by industrialization 604

Dynamic recrystallization kinetics and microstructure evolution of 7055 aluminum alloy during hot compression 605

Viscosities in PbO − ZnO − “FexO” − SiO2–CaO system for lead and zinc smelting slags 606

Behavior of porosity in billet during rolling process of rail 607

Application of a chamfer slab technology to reduce internal cracks of continuous casting bloom during soft reduction process 608

Effects of alkali metal on solution loss and coke degradation 609

Influence of thermal conductivity of ceramic materials on heating rate/coking time and coke quality in cokemaking 610

Utilization of low-grade BHQ iron ore by reduction roasting followed by magnetic separation for the production of magnetite-based pellet feed 611

Thermodynamics and transient behavior of the inclusion in Si deoxidized stainless steel for high-grade plate 612

Hot forming with a nonuniform temperature field using die partition cooling 613

Influence of material parameters on 2D-martensitic transformation based on the phase-field finite-element method 614

An original unified approach for the description of phase transformations in steel during cooling: first application to binary Fe–C 615

Effect of heat input on microstructure and properties of dissimilar laser welded joints between TWIP and TRIP steels 616

Assessment of an Eulerian multi-fluid VOF model for simulation of multiphase flow in an industrial Ruhrstahl–Heraeus degasser 617

Zinc diffusion induced precipitation of σ-phase in austenitic stainless steel 618

Inclusions evolution during the LF refining process of 439 ultra-pure ferritic stainless steel 619

Metallurgical characteristics of refining slag used for high manganese steel 620

High-efficiency continuous casting of GCr15 bearing steel bloom based on cooperative control technique of complex electromagnetic stirring and soft reduction 621

The relationship between the deformation and the indentation size effect (ISE) 622

Effect of composition and morphology of non-metallic inclusions on fracture toughness in as-cast AHSS 623

Effect of mechanical activation on the structure of pulverized coal and iron ore powder 624

Real-time indices focus on slag flowability and coke strength for blast furnace operation 625

Research on the oxygen content in 304L stainless steel during VOD-LF-CC process based on IMCT 626

Effect of SiO2 containing slag for electroslag remelting on inclusion modification of 42CrMo steel 627

Microstructure and thermodynamic analysis of nanostructured Cu-13.2%Al-4%Ni ternary system synthesized by mechanical alloying 628

Effect of vibration on the formation of second phase particles in cast-rolling strips 629

Effect of B2O3 on the carbothermal reduction of vanadium titanium magnetite 630

Effect of hybrid reinforcement at stirred zone of dissimilar aluminium alloys during friction stir welding 631

Study on microstructure and texture of a new-type low Si high Mn non-oriented silicon steel 50W250 632

Transverse heterogeneity of interfacial bonding behavior during roll bonding of Cu/Al bimetallic plates 633

A contribution to laser cladding of Ti-6Al-4V titanium alloy 634

Thermal conductivity of titanium slags 635

Large eddy simulation modelling of asymmetrical flow structures in a vertical-bending continuous caster 636

A novel hot-tamping process for producing an improved quality of coke 637

Effects of basicity and CaF2 on the viscosity of CaF2–CaO–SiO2 slag for electroslag remelting process 638

Effect of manganese pre-partitioning process on the microstructure and mechanical properties of low carbon dual phase steel 639

Viscosities in PbO − ZnO − “Fe_xO” − SiO₂–CaO system for lead and zinc smelting slags 606

Effect of SiO₂ containing slag for electroslag remelting on inclusion modification of 42CrMo steel 627

Effect of B₂O₃ on the carbothermal reduction of vanadium titanium magnetite 630

Effects of basicity and CaF₂ on the viscosity of CaF₂–CaO–SiO₂ slag for electroslag remelting process 638