Metallurgical Research & Technology

Inflow process of Fe, Ni, and Cr impurities in Ti sponge during kroll process 101

Sheng Zhuo, Li Kaihua, Li Liang and Cheng Xiaozhe

Published online: 03 January 2020

DOI: https://doi.org/10.1051/metal/2019067

• Abstract
• Full HTML
• PDF (4.661 MB)
• References

Investigation of the mechanism for selective flocculation process using natural iron ore tailings 102

Lopamudra Panda, Surendra Kumar Biswal, Rayasam Venugopal and Narayan R. Mandre

Published online: 13 January 2020

DOI: https://doi.org/10.1051/metal/2019047

• Abstract
• Full HTML
• PDF (1.802 MB)
• References

Average carbon content change during gas-solid decarburization of 2 mm iron sheet with a high carbon content 103

Rong Cheng, Liqun Ai, Lu-kuo Hong and Cai-jiao Sun

Published online: 13 January 2020

DOI: https://doi.org/10.1051/metal/2019069

• Abstract
• Full HTML
• PDF (1011 KB)
• References

The role of chromium during austempering of ductile iron 104

Arnoldo Bedolla-Jacuinde, Román Angel Hernandez-Hernandez, Francisco Vapeani Guerra and Ignacio Mejia

Published online: 20 January 2020

DOI: https://doi.org/10.1051/metal/2019072

• Abstract
• Full HTML
• PDF (3.574 MB)
• References

Preparation and performance analysis of gas-quenched steel slag beads 105

Hui Wang, Wei Zhang, Chao Liu, Hongwei Xing, Chen Guo and Yuzhu Zhang

Published online: 24 January 2020

DOI: https://doi.org/10.1051/metal/2019073

• Abstract
• Full HTML
• PDF (1.793 MB)
• References

Free Access

Erratum

Correction notice to: Experimental in-situ metallographic investigations of industrial hydrocarbon processed fired heater tubes - Metall. Res. Technol. 116, 203 (2019), https://doi.org/10.1051/metal/2018062 106

Chidambaram Subramanian

Published online: 27 January 2020

DOI: https://doi.org/10.1051/metal/2019055

• Abstract
• Full HTML
• PDF (2.830 MB)

Modification of sulfide by Te in Y1Cr13 free-cutting stainless steel 107

Xiangyu Wu, Liang-pin Wu, Jian-bo Xie, Ping Shen and Jian-xun Fu

Published online: 27 January 2020

DOI: https://doi.org/10.1051/metal/2019070

• Abstract
• Full HTML
• PDF (4.332 MB)
• References

Development and production of large blast furnaces from 2015 to 2016 in China 108

Bing Dai, Hong-ming Long, Yong-cai Wen, Yi-long Ji and Yun-cai Liu

Published online: 27 January 2020

DOI: https://doi.org/10.1051/metal/2020001

• Abstract
• Full HTML
• PDF (1011 KB)
• References

Practical thermal model for a radiant tubes annealing furnace 109

Angel García-Martino and María Manuela Prieto

Published online: 11 February 2020

DOI: https://doi.org/10.1051/metal/2020003

• Abstract
• Full HTML
• PDF (1.169 MB)
• References

Effects of cooling rate and isothermal holding on the characteristics of MnS particles in high-carbon heavy rail steels 110

Xuewei Zhang, Caifu Yang and Lifeng Zhang

Published online: 14 February 2020

DOI: https://doi.org/10.1051/metal/2020002

• Abstract
• Full HTML
• PDF (5.206 MB)
• References

Role of slag on inclusions control and its effect on primary carbides in H13 steel 111

Xijie Wang, Guangqiang Li, Yu Liu, Qiang Wang and Zhao Zhang

Published online: 17 February 2020

DOI: https://doi.org/10.1051/metal/2020005

• Abstract
• Full HTML
• PDF (3.524 MB)
• References

Characteristics of coke pore formation and its effect on solution loss degradation 112

Yaheng Geng, Rui Guo, Yizhuo Li, Xin Zhang and Jiaxiong Lin

Published online: 19 February 2020

DOI: https://doi.org/10.1051/metal/2020004

• Abstract
• Full HTML
• PDF (1.760 MB)
• References

Theoretical and practical research on relationship between blast air condition and hearth activity in large blast furnace 113

Bing Dai, Hong-ming Long, Yi-long Ji, Jia-ting Rao and Yun-cai Liu

Published online: 19 February 2020

DOI: https://doi.org/10.1051/metal/2020007

• Abstract
• Full HTML
• PDF (699.2 KB)
• References

Modeling of slag foaming height of electric arc furnace using stepwise regression analysis 114

Jaegak Lee, Jungkeuk Kim, Haejin Hwang, Kyungchan Son, Wonseok Jeon, Younghwan Kim, Hyungsic Um and Hyunseok Yang

Published online: 26 February 2020

DOI: https://doi.org/10.1051/metal/2020008

• Abstract
• Full HTML
• PDF (1.232 MB)
• References

A new method of red mud recycling in the process of hot metal pretreatment 115

Bo Zhang, Chengjun Liu and Maofa Jiang

Published online: 26 February 2020

DOI: https://doi.org/10.1051/metal/2020010

• Abstract
• Full HTML
• PDF (1.811 MB)
• References

Effect of Co on microstructure and mechanical properties of precipitation hardening stainless steel 116

Xiang LV, De-ning Zou, Jiao Li, Yang Pang and Yu-nong Li

Published online: 26 February 2020

DOI: https://doi.org/10.1051/metal/2020006

• Abstract
• Full HTML
• PDF (2.868 MB)
• References

The operation of charcoal blast furnaces in the XIXth century 117

Rémy Nicolle

Published online: 03 March 2020

DOI: https://doi.org/10.1051/metal/2019071

• Abstract
• Full HTML
• PDF (1.757 MB)
• References

Research on the melt behavior of rare-earth-rich iron minerals by direct reduction 118

Wentao Guo, Zhi Wang, Zengwu Zhao and Wenfeng Wang

Published online: 04 March 2020

DOI: https://doi.org/10.1051/metal/2020009

• Abstract
• Full HTML
• PDF (1.888 MB)
• References