Metallurgical Research & Technology

Degradation behaviors of coke under complex solution loss conditions 101

Jun Zhang, Dongsheng Yu, Rui Guo and Jiaxiong Lin

Published online: 27 November 2020

DOI: https://doi.org/10.1051/metal/2020081

Analysis of internal cracks in high carbon casting bloom induced by soft reduction process and its improvement using numerical simulations and industrial experiments 102

Nanfu Zong, Jian Huang, Jun Liu, Sida Ma and Tao Jing

Published online: 27 November 2020

DOI: https://doi.org/10.1051/metal/2020079

Effect of plasma gas atmosphere on hydroxyapatite-coated titanium-based implants 103

Ravindra Kotian, Madhu Keshava Bangera, Karen Boaz and Prashanthi S. Madhyastha

Published online: 30 November 2020

DOI: https://doi.org/10.1051/metal/2020072

Laser welding-brazing of alumina to 304 stainless steel with an Ag-based filler material 104

Yan Zhang, YanKun Chen, JianPing Zhou, DaQian Sun and HongMei Li

Published online: 04 December 2020

DOI: https://doi.org/10.1051/metal/2020086

An investigation on thermodynamics and kinetics of η phase formation in Nb-modified iron-nickel base A286 superalloy 105

Reza Soleimani Gilakjani, Seyed Hossein Razavi and Masoumeh Seifollahi

Published online: 04 December 2020

DOI: https://doi.org/10.1051/metal/2020084

Measurement of erosion state and refractory lining thickness of blast furnace hearth by using three-dimensional laser scanning method 106

Lei Zhang, Jianliang Zhang, Kexin Jiao, Guoli Jia, Jian Gong, Xiaoting Yang, Manxiang Zhao and Weibin Duan

Published online: 10 December 2020

DOI: https://doi.org/10.1051/metal/2020085

The effects of temperature and strain rate on the hot deformation behavior of AISI H10 tool steel 107

Maryam Kamali Ardakani and Maryam Morakabati

Published online: 18 December 2020

DOI: https://doi.org/10.1051/metal/2020082

Effects of bottom plate in friction stir welding of AA6061-T6 108

M.A. Vinayagamoorthi, M. Prince and S. Balasubramanian

Published online: 18 December 2020

DOI: https://doi.org/10.1051/metal/2020087

Preparation of high-strength biochar composite briquette for blast furnace ironmaking 109

Zi Yu, Zhu Liu, Huiqing Tang and Qingguo Xue

Published online: 19 January 2021

DOI: https://doi.org/10.1051/metal/2020083

Effect of tool pin geometry on microstructure and mechanical properties of friction stir spot welds of 7075-T651 aluminium alloy 110

Omer Ekinci and Zulkuf Balalan

Published online: 20 January 2021

DOI: https://doi.org/10.1051/metal/2020093

Overview of metallurgical studies on weld deposited surface by plasma transferred arc technique 111

Vivek D. Kalyankar and Hardik V. Naik

Published online: 20 January 2021

DOI: https://doi.org/10.1051/metal/2020088

Effect of different lapping orders on mechanical performance and nugget forming process for three-sheet dissimilar resistance spot welding joints between DC06 and unequal-thickness hot-stamped B1500HS steel sheets 112

Xin Mao, Zhi Cheng, Qiang Zhu, Wurong Wang, Xicheng Wei and Yangyang Zhao

Published online: 26 January 2021

DOI: https://doi.org/10.1051/metal/2020094

Development of thin-gauge low iron loss non-oriented silicon steel 113

Jia-Long Qiao, Fei-Hu Guo, Jin-Wen Hu, Chuan-Xing Liu and Sheng-Tao Qiu

Published online: 24 February 2021

DOI: https://doi.org/10.1051/metal/2020091

Modeling of supersonic jet behavior in the vacuum refining process 114

Zhonghua Sheng, Lianghua Feng, Kun Liu, Bin Yang and Lingzhong Kong

Published online: 02 March 2021

DOI: https://doi.org/10.1051/metal/2021004

The influence of carbonitriding conditions on microstructure and mechanical properties of 25CrMo4 low-alloy steel 115

Abdelkarim Ghanem and Mohamed Ali Terres

Published online: 09 February 2021

DOI: https://doi.org/10.1051/metal/2020089