Subscriber Authentication Point

EDPS Account

Volume 117 / No 6 (2020)

Metallurgical Research & Technology

Volume 117 / No 6 (2020)

Export the citation of the selected articles Export
Select all

Investigation of the weldability of AISI304 and AISI1030 steels welded by friction welding 601

Tanju Teker, Eyyüp Murat Karakurt, Murat Özabaci and Yaşar Güleryüz

Published online: 11 September 2020

DOI: https://doi.org/10.1051/metal/2020058

Numerical analysis of local heat flux and thin-slab solidification in a CSP funnel-type mold with electromagnetic braking 602

Heping Liu, Jianjun Zhang, Hongbiao Tao and Hui Zhang

Published online: 11 September 2020

DOI: https://doi.org/10.1051/metal/2020044

Isothermal oxidation kinetics and oxidation behavior of nickel slag 603

Xiaoming Li, Xinyi Zhang, Yi Li and Xiangdong Xing

Published online: 16 September 2020

DOI: https://doi.org/10.1051/metal/2020056

Research on flow rate engineering calculation model of U-pipes for fabricating transverse variable profiled (TVP) strips by simulation and experiment 604

Ce Ji, Huagui Huang, Yifeng Sun, Chaoqun Zhang, Lin Gao and Shangbin Zhang

Published online: 16 September 2020

DOI: https://doi.org/10.1051/metal/2020057

Preliminary study on the preparation of graphene from coke with a combined chemical and physical routine 605

Minmin Sun, Jianliang Zhang, Minghao Li, Wei Xiong, Kejiang Li and Hongtao Li

Published online: 16 September 2020

DOI: https://doi.org/10.1051/metal/2020060

Characterization of blast furnace flue dust – a multi analytical techniques approach 606

Shrenivas S. Ashrit, Supriya Sarkar, Rashmi Singh, Sundeep Z. Yadav and Ravikrishna V. Chatti

Published online: 16 September 2020

DOI: https://doi.org/10.1051/metal/2020059

Effect of heating rate of final annealing stage on secondary recrystallization in grain-oriented silicon steel 607

Lifeng Fan, Xingyuan Zhao, Rong Zhu, Jianzhong He and Yuan Xiang Zhang

Published online: 16 September 2020

DOI: https://doi.org/10.1051/metal/2020063

Correlation between hardness and abrasive wear of grinding balls 608

Sahraoui Aissat, Mohamed Zaid and Abdelhamid Sadeddine

Published online: 25 September 2020

DOI: https://doi.org/10.1051/metal/2020062

Effect of the weir structure in the tundish on the cleanliness of IF steels and elimination of spot-like defects in deep drawing automobile steel sheets 609

Xiaoxuan Deng, Guoliang Liu, Qiangqiang Wang, Baisong Liu, Chenxi Ji, Haibo Li, Xiaojing Shao and Guosen Zhu

Published online: 02 October 2020

DOI: https://doi.org/10.1051/metal/2020061

EIS study of the corrosion behavior of an organic coating applied on Algerian oil tanker 610

Nadia Hammouda and Kamel Belmokre

Published online: 09 October 2020

DOI: https://doi.org/10.1051/metal/2020064

Review

Technological advancements in evaluating the performance of the pulverized coal injection through tuyeres in blast furnace 611

Ashish Agrawal, Rohit Kumar Tiwari, Sanjiv Kumar, Rajeswar Chatterjee, Basant Kumar Singh, Rama Shankar Singh, Vineet Ranjan Tripathi, Subhashis Kundu, Padmapal, R.V. Ramna and Manish Kumar Singh

Published online: 15 October 2020

DOI: https://doi.org/10.1051/metal/2020068

Microstructural characterization and mechanical behavior of Cr25Ni35NbM alloy dissimilar weld joint for application in a hydrogen reformer furnace 612

Jingfeng Guo, Wenwen Liu, Chunxiu Li and Xiaoming Zhang

Published online: 19 October 2020

DOI: https://doi.org/10.1051/metal/2020067

Examination of microstructure evolution and strengthening mechanisms in an aluminum-based hybrid composite prepared through the spark plasma sintering method 613

Mohammad Reza Rezaei, Alireza Albooyeh, Hassan Shiraghaei and Misagh Shayestefar

Published online: 21 October 2020

DOI: https://doi.org/10.1051/metal/2020065

A novel method for preparing Ti₅Si₃ from Ti-bearing blast furnace slag 614

Ben Peng, Long Wu, Jin-Hui Zhu, Yong Hou and Guo-Hua Zhang

Published online: 29 October 2020

DOI: https://doi.org/10.1051/metal/2020073

Modification of MnS inclusion by tellurium in 38MnVS6 micro-alloyed steel 615

Ping Shen, Lei Zhou, Qiankun Yang, Zhiqi Zeng, Kenan Ai and Jianxun Fu

Published online: 29 October 2020

DOI: https://doi.org/10.1051/metal/2020066

Effect of Ce-La on inclusion evolution in Al-killed high strength steel 616

Ruming Geng, Jing Li, Chengbin Shi, Jianguo Zhi and Bin Lu

Published online: 29 October 2020

DOI: https://doi.org/10.1051/metal/2020076

Enhancement of the productivity of non-recovery stamp charge coke oven plant at JSPL Raigarh 617

Rupak Ranjan, H.P. Tiwari, P.K. Srivastava, Mansingh S. Raghuwanshi, Ashwani Kumar Jaiswal and Moreshwar G. Borkar

Published online: 29 October 2020

DOI: https://doi.org/10.1051/metal/2020074

Estimating the mechanical properties of friction welded AISI410 MSS joints using empirical relationship 618

M. Bakkiyaraj, G. Saikrishnan and V. Balasubramanian

Published online: 29 October 2020

DOI: https://doi.org/10.1051/metal/2020075

Investigation on the control of multiphase flow behavior in a continuous casting tundish during ladle change 619

Rui Xu, Haitao Ling, Haijun Wang, Lizhong Chang and Shengtao Qiu

Published online: 04 November 2020

DOI: https://doi.org/10.1051/metal/2020070

Resistance spot weldability of TBF steel sheets with dissimilar thickness 620

Imren Ozturk Yilmaz, Abdullah Yasin Bilici and Hakan Aydin

Published online: 09 November 2020

DOI: https://doi.org/10.1051/metal/2020071

Enhancement of microstructure uniformity and grain refining efficiency of Al-5Ti-1B alloy via powder extrusion 621

Shuncheng Wang, Huilan Huang, Zhibo Zhang and Kaihong Zheng

Published online: 09 November 2020

DOI: https://doi.org/10.1051/metal/2020069

Production and characterization of TiO₂ nanoparticle thin films for its application in DSSCs 622

Saranyoo Chaiwichian and Sumneang Lunput

Published online: 13 November 2020

DOI: https://doi.org/10.1051/metal/2020078

Effect of heating temperature on oxidation behavior of low density steels with medium manganese content 623

Li Shujia, Lyu Naibing, Deng Suhuai, Luo Zhijun and Xu Shixin

Published online: 17 November 2020

DOI: https://doi.org/10.1051/metal/2020077

On the effect of long service exposure: changes in microstructure and mechanical properties of Ni-based superalloy 624

Hassan Keyvanlou, Reza Soleimani Gilakjani and Majid Nezakat

Published online: 17 November 2020

DOI: https://doi.org/10.1051/metal/2020080