Revue de Métallurgie

Silice sans dilatation en réparation de fours à coke. Bilan et perspectives p. 709

J. Poirier, J.M. Leroy, W. Goerenz, G. Slangen, J. Heintzen and W. Zymla

Published online: 16 January 2017

DOI: https://doi.org/10.1051/metal/199996060709

• Abstract
• PDF (19.6 MB)

Blast furnace model for gas flow control p. 715

G. Danloy, J. Mignon and L. Bonte

Published online: 16 January 2017

DOI: https://doi.org/10.1051/metal/199996060715

• Abstract
• PDF (23.0 MB)

Expert system for the control of liquid steel production at Sidmar p. 721

L. Van De Putte, F. Haers, L. Haers and H. Vansteenkiste

Published online: 16 January 2017

DOI: https://doi.org/10.1051/metal/199996060721

• Abstract
• PDF (27.8 MB)

On-line bulging and shear measurements near the straightening point in a continuous caster p. 729

M. van Rossum, C.L.A. Delicaat, R. Mostert, J. Vermeij and E.J.G. Spelbos

Published online: 16 January 2017

DOI: https://doi.org/10.1051/metal/199996060729

• Abstract
• PDF (29.5 MB)

La modernisation et la remise en route du laminoir à tôles fortes de Vitkovice (Ostrava, République Tchèque) p. 737

I. Kornas, R. Pichler, F. Parzer, B. Heise, H. Frank, J. Zwick and K. Niel

Published online: 16 January 2017

DOI: https://doi.org/10.1051/metal/199996060737

• Abstract
• PDF (59.4 MB)

Innovation in hot rolling equipment for modern high performance mills p. 749

P. Bobig, R. Borsi and M. Rotti

Published online: 16 January 2017

DOI: https://doi.org/10.1051/metal/199996060749

• Abstract
• PDF (37.9 MB)

Vision system for surface defects in the hot strip mill of Sidmar p. 757

G. Sonck, M. De Rick and P. Van De Walle

Published online: 16 January 2017

DOI: https://doi.org/10.1051/metal/199996060757

• Abstract
• PDF (76.5 MB)

Le système de gestion de l’énergie mis en œuvre chez VOEST-ALPINE Stahl Linz p. 771

G. Schmidt, F. Blümelhuber and G. Straka

Published online: 16 January 2017

DOI: https://doi.org/10.1051/metal/199996060771

• Abstract
• PDF (38.4 MB)

Traitements de surface par voie aqueuse : enjeux de la modélisation p. 779

C. Allèly, P. Bocage, J.C. Catonné, F. Kop and R. Nicolle

Published online: 16 January 2017

DOI: https://doi.org/10.1051/metal/199996060779

• Abstract
• PDF (41.9 MB)

Propriétés d’emploi des tôles fortes en acier - Première partie : Essais et caractéristiques p. 789

M. Lafrance

Published online: 16 January 2017

DOI: https://doi.org/10.1051/metal/199996060789

• Abstract
• PDF (131.0 MB)

Refurbishment opportunities and the performance of steel intensive overcladding p. 813

A.W. Humphreys and T.R. Heatley

Published online: 16 January 2017

DOI: https://doi.org/10.1051/metal/199996060813

• Abstract
• PDF (35.2 MB)