Argon bubbles in slabs, a non-homogeneous distribution p. 745 W. Damen, G. Abbel and G. de Gendt Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199794060745 PDF (23.40 MB)
Study of the fluid flow in the mould for high quality slab casting p. 751 H.B.M. Schulte, R.H.M.G. Nabben, D.W. van der Plas and D. Triezenberg Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199794060751 PDF (36.42 MB)
Slab width control at Hoogovens Steel p. 761 R. Mostert and D. Triezenberg Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199794060761 PDF (29.74 MB)
MYOSOTIS : coulée continue de bandes minces p. 769 H. Legrand, L. Vendeville, J.M. Damasse, R.W. Simon, D. Senk and C. Mollers Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199794060769 PDF (38.7 MB)
Application of large capacity three-level GTO inverters for plate mill drives p. 777 K. Morita, H. Hishiya, S. Kayama, A. Kubota, F. Nishimura, H. Koumo and H. Masuda Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199794060777 PDF (22.1 MB)
Selective differential roll cooling in relation to strip flatness and shape control p. 785 G. Downey Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199794060785 PDF (38.56 MB)
Contrôle d’un four de recuit continu à partir de la température et de l’émissivité p. 795 P. Hervé, L. Viellard and A. Morel Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199794060795 PDF (31.2 MB)
Outline of quality assurance systems of No. 2 continuous annealing line at Kashima Works p. 803 K. Kishi, F. Yamamoto, H. Okubo, Y. Adachi, R. Murayama and K. Hiramoto Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199794060803 PDF (24.77 MB)
Amélioration de la gestion des gaz de l’usine de Sollac Dunkerque p. 811 J.F. Blondeel, B. Butez, F. Lefebvre, B. Liévin and C. Lourme Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199794060811 PDF (23.0 MB)
Maintenance support systems using a network technique of programmable controllers p. 819 H. Domoto, T. Iwamoto, K. Moriyama and S. Nakao Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199794060819 PDF (27.38 MB)
Development of the SIBETEX sheet having excellent drawability and paint appearance p. 827 C. De Mare, J. Scheers, F. Lambert, M. Vermeulen, L. De Graef and Y. Gadeyne Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199794060827 PDF (38.58 MB)
Un nouveau critère de striction pour les courbes limites de formage p. 837 G. Marron, L. Moinier, P. Patou and J.C. Céleski Published online: 17 January 2017 DOI: https://doi.org/10.1051/metal/199794060837 PDF (31.4 MB)