The Shinseiko Project : a new environment friendly steelmaking route based on scrap p. 473 S. Sato, M. Takeuchi, Y. Mizukami and J.P. Birat Published online: 18 January 2017 DOI: https://doi.org/10.1051/metal/199693040473 PDF (14.18 MB)
Des solutions de pointe pour l'amélioration des performances des fours électriques à arc p. 485 A.G. Müller, L.P. Hofer, H.A. Berger, W.J.F. Pirklbauer and L.P. Gould Published online: 18 January 2017 DOI: https://doi.org/10.1051/metal/199693040485 PDF (19.84 MB)
Maîtrise de la déviation d'arc au four électrique d'Unimétal Gandrange p. 497 J.C. Borrel, L. Mineau, N. Meysson and J.L. Roth Published online: 18 January 2017 DOI: https://doi.org/10.1051/metal/199693040497 PDF (7.560 MB)
The secondary refining technologies for improving the cleanliness of ultra-low carbon steel at Kwangyang Works p. 503 K.K. Lee, J.M. Park, J.Y. Chung, S.H. Choi and S.B. Ahn Published online: 18 January 2017 DOI: https://doi.org/10.1051/metal/199693040503 PDF (7.477 MB)
Steel cleanliness improvements at National Steel Great Lakes Division, No. 2 caster p. 511 R. Hayden and S. Chakraborty Published online: 18 January 2017 DOI: https://doi.org/10.1051/metal/199693040511 PDF (13.29 MB)
Progress in the production of grade 52100 at Ascométal Fos and Dunes mills p. 523 M. Falcoz-Vigne, A. Paulus, G. Giroud, P. Damie, G. Baudry, J. Saleil and C. Gatellier Published online: 18 January 2017 DOI: https://doi.org/10.1051/metal/199693040523 PDF (10.07 MB)
Desulphurisation during RH treatment at Hoogovens Staal p. 533 W. van der Knoop, W. Tiekink and V.P. de Jong Published online: 18 January 2017 DOI: https://doi.org/10.1051/metal/199693040533 PDF (9.360 MB)
First operating results of HYLSA's CSP plant p. 541 A. Fernández and Franz Küper Published online: 18 January 2017 DOI: https://doi.org/10.1051/metal/199693040541 PDF (11.60 MB)
The status of ISP at the Arvedi Works, Cremona, Italy p. 551 G. Gosio, L. Manini, A. Guindani, F.P. Pleschiutschnigg, B. Krüger, H.D. Hoppmann and M. Morando Published online: 18 January 2017 DOI: https://doi.org/10.1051/metal/199693040551 PDF (21.31 MB)
Optimisation de la distribution d'argon et des réfractaires à Sollac Dunkerque p. 567 A. d'Anselme, P. Tassot and J.P. Radot Published online: 18 January 2017 DOI: https://doi.org/10.1051/metal/199693040567 PDF (9.020 MB)
Challenge to the highest PC rate operating at Fukuyama No. 4 BF p. 575 K. Kimura, S. Kishimoto, A. Sakai, T. Ariyama and M. Sato Published online: 18 January 2017 DOI: https://doi.org/10.1051/metal/199693040575 PDF (6.171 MB)
Silica film deposition control during alkaline electrocleaning p. 581 L. Bordignon, P. Bastin and M. Lamberigts Published online: 18 January 2017 DOI: https://doi.org/10.1051/metal/199693040581 PDF (8.384 MB)