Metallurgical Research & Technology

The mechanical parameters modeling of heavy steel plate snake/gradient temperature rolling with the same roll diameters 301

Lian-Yun Jiang, Tao Zhen, Guo Yuan, Jin-Bo Huang, Yao-Yu Wei, Heng Li and Ping Wang

Published online: 30 April 2020

DOI: https://doi.org/10.1051/metal/2020019

• Abstract
• Full HTML
• PDF (3.302 MB)
• References

Evaluation of carbothermic processing for mixed discarded lithium-ion batteries 302

Sanjay Pindar and Nikhil Dhawan

Published online: 08 May 2020

DOI: https://doi.org/10.1051/metal/2020025

• Abstract
• Full HTML
• PDF (2.988 MB)
• References

Investigation on microstructure and mechanical properties of Al/Cu butt joints by CMT method in asymmetrical V-groove configuration 303

Gang Li, Jufeng Song, Xiaofeng Lu, Xiaolei Zhu, Shengyu Xu and Yupeng Guo

Published online: 13 May 2020

DOI: https://doi.org/10.1051/metal/2020028

• Abstract
• Full HTML
• PDF (6.553 MB)
• References

Study on the transformation and microstructure evolution during hot-charging rolling process of a weathering steel 304

Man Liu, Guang Xu, Guanghui Chen and Zhoutou Wang

Published online: 13 May 2020

DOI: https://doi.org/10.1051/metal/2020027

• Abstract
• Full HTML
• PDF (3.288 MB)
• References

Development and production of Chinese large blast furnaces in 2019 compared with 2015–2016 305

Bing Dai, Hong-ming Long, Yi-long Ji, Dai-wen Liu and Jia-yong Qiu

Published online: 13 May 2020

DOI: https://doi.org/10.1051/metal/2020026

• Abstract
• Full HTML
• PDF (1.808 MB)
• References

Carbothermic reduction of low-grade laterite-graphite composite pellets 306

Jia-Shyan Shiau

Published online: 13 May 2020

DOI: https://doi.org/10.1051/metal/2020024

• Abstract
• Full HTML
• PDF (2.738 MB)
• References

Influence of Nb₂O₅ and basicity on the viscosity and structure of CaO-SiO₂-Nb₂O₅-CeO₂-CaF₂ slag system 307

Zhuang Ma, Zengwu Zhao, Wentao Guo and Zhi Wang

Published online: 28 May 2020

DOI: https://doi.org/10.1051/metal/2020023

• Abstract
• Full HTML
• PDF (3.642 MB)
• References

Constrained dynamic matrix control strategy for a monitoring system for AGC of hot strip mills 308

Yin Fang-chen and Yu Liu-Qi

Published online: 01 June 2020

DOI: https://doi.org/10.1051/metal/2020029

• Abstract
• Full HTML
• PDF (3.982 MB)
• References

Freckle formation and prevention in high strength low alloy steel ingots 309

Wei Yan, Yang Zhang, Weiqing Chen and Jing Li

Published online: 01 June 2020

DOI: https://doi.org/10.1051/metal/2020030

• Abstract
• Full HTML
• PDF (1008 KB)
• References

Measurement of the steady state tearing in thin sheets using the contactless system 310

Ľubomír Ambriško and Ladislav Pešek

Published online: 01 June 2020

DOI: https://doi.org/10.1051/metal/2020032

• Abstract
• Full HTML
• PDF (1.028 MB)
• References

Microstructure evolution mechanism of Al/Mg dissimilar joint during friction stir welding 311

Wei Chen, Wenxian Wang, Zepeng Liu, Decheng An, Ning Shi, Tingting Zhang and Min Ding

Published online: 03 June 2020

DOI: https://doi.org/10.1051/metal/2020012

• Abstract
• Full HTML
• PDF (1.240 MB)
• References