Metallurgical Research & Technology

Analysis of Fe and Mn impurities in Chinese sponge titanium enterprise using an input-output model 401

Wei Li, Fuzhong Wu, Huixin Jin and Shuie Li

Published online: 04 June 2020

DOI: https://doi.org/10.1051/metal/2020031

Aging-induced formation of the nano-sized clustered carbides in the weld metal of Co-based alloy/AISI 410 stainless steel dissimilar welded joint 402

Yuanheng Zhang, Kai Ding, Guanzhi Wu, Bingge Zhao, Yuanfang Wang, Tao Wei and Yulai Gao

Published online: 25 June 2020

DOI: https://doi.org/10.1051/metal/2020033

Comparative study of low-grade banded iron ores for iron recovery 403

Shrey Agrawal, Veeranjaneyulu Rayapudi and Nikhil Dhawan

Published online: 25 June 2020

DOI: https://doi.org/10.1051/metal/2020034

A novel process for cobalt and copper recovery from cobalt white alloy with high silicon 404

Guoxing Ren, Zhihong Liu, Bing Pan and Songwen Xiao

Published online: 06 July 2020

DOI: https://doi.org/10.1051/metal/2020036

Tensile and wear behaviour of friction stir welded AA5052 and AA6101-T6 aluminium alloys: effect of welding parameters 405

G. Kasirajan, Sathish Rengarajan, R. Ashok kumar, G.R. Raghav, V.S. Rao and K.J. Nagarajan

Published online: 07 July 2020

DOI: https://doi.org/10.1051/metal/2020039

Effect of cold rolling and subsequent aging on tensile properties and thermoelastic coefficient of Ni-Span-C 902 superalloy 406

Maryam Morakabati, Peyman Ahmadian and Mohammad Rasoul Moazami Goodarzi

Published online: 07 July 2020

DOI: https://doi.org/10.1051/metal/2020038

Correlation between microstructural gradient and microindentation properties of dissimilar weld between INCONEL 625 and Duplex Stainless Steel 407

Ammar Chabbi, Mabrouk Bouabdallah, Sergio Sao-Joao, Achraf Boudiaf and Guillaume Kermouche

Published online: 24 July 2020

DOI: https://doi.org/10.1051/metal/2020035

Free Access

Evolution of non-metallic inclusions during heat treatment 408

Chengsong Liu and Bryan Webler

Published online: 29 July 2020

DOI: https://doi.org/10.1051/metal/2020040

Effect of titanium on the skull formation of the blast furnace hearth 409

Yan Li, Tingfang Jian, Tongxiang Ma, Meilong Hu, Leizhang Gao and Yu Yang

Published online: 29 July 2020

DOI: https://doi.org/10.1051/metal/2020042

Abnormal toughness characteristics and fracture model in simulated welding HAZ of 5%Ni Steel 410

Ding Min

Published online: 07 August 2020

DOI: https://doi.org/10.1051/metal/2020037

Optimization of experimental conditions on preparation of oxidized pellets with New Zealand sea sand ore 411

Zhenxing Xing, Gongjin Cheng, Zixian Gao, He Yang and Xiangxin Xue

Published online: 12 August 2020

DOI: https://doi.org/10.1051/metal/2020043

Influence of the prime hard coking coal in stamp charge cokemaking: true or false 412

Hari Prakash Tiwari, Vishwesh M. Shisani, Bhavendra Kumar Sahu, Rabindra Kumar Sabat and Damodar Mittal